TP-300
Online total phosphorus analyzer with digestion and colorimetry

- Measuring Range
- 0~2mg/L
- Accuracy
- 0.05mg/L or ±10%
- Digital Output
- RS485 Modbus RTU
- Listed operating conditions
- 0~50°C, 0~1Bar
Online total phosphorus analyzer with digestion and colorimetry
Apure TP-300 online total phosphorus analyzer, based on digestion and spectrophotometric measurement, with a 0 to 2 mg/L measuring range and RS485 Modbus RTU output.
Overview. The Apure TP-300 is an online analyzer for total phosphorus, based on digestion followed by spectrophotometric measurement. Total phosphorus and direct orthophosphate are different measurements: an orthophosphate reading alone does not establish total phosphorus.
Main characteristics. Measuring range of 0 to 2 mg/L, listed accuracy of 0.05 mg/L or ±10%. The listed method comprises persulfate digestion at 120–124°C, conversion to orthophosphate, then a molybdate, antimony and ascorbic-acid colour reaction. The procedure, reagents and calibration must be confirmed for the supplied configuration.
Interfaces and connectivity. RS485 digital output with Modbus RTU protocol. The register map, units, timing and validity or status information must be supplied for integration.
Power and environment. Listed operating conditions of 0 to 50°C and 0 to 1 bar. The actual external temperature and pressure limits, materials and installation arrangement must be confirmed for the ordered unit.
Typical uses. Monitoring phosphorus content in water for nutrient assessment, with integration into a supervisory system via Modbus. The measurement alone does not predict a specific algal event.
Integration. Define sampling, any filtration, conversion recovery, blank correction and calibration basis, then verify with quality-control samples and paired field samples. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for TP-300, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Accuracy | 0.05mg/L or ±10% |
| Digital Output | RS485 Modbus RTU |
| Listed operating conditions | 0~50°C, 0~1Bar |
| Measuring Range | 0~2mg/L |
| Model | TP-300 |
| Orthophosphate | A direct reactive-phosphorus measurement is distinct from a total-phosphorus determination. |
| Required result | Sampling and method requirement |
| Total dissolved phosphorus | A filtered sample requires the specified conversion and measurement procedure; the result concerns the dissolved fraction. |
| Total phosphorus in whole water | The sampling and conversion method must account for the relevant dissolved and particulate forms. Removing particles before analysis can change the fraction reported. |
No specification matches.
Last verification : 2026-11-06
Official documents and the technical data recorded for TP-300. For a missing document or a specific revision, our experts send it to you.
Apure TP-300 online total phosphorus analyzer, based on digestion and spectrophotometric measurement, with a 0 to 2 mg/L measuring range and RS485 Modbus RTU output.
| Parameter | Value |
|---|---|
| Accuracy | 0.05mg/L or ±10% |
| Digital Output | RS485 Modbus RTU |
| Listed operating conditions | 0~50°C, 0~1Bar |
| Measuring Range | 0~2mg/L |
| Model | TP-300 |
| Orthophosphate | A direct reactive-phosphorus measurement is distinct from a total-phosphorus determination. |
| Required result | Sampling and method requirement |
| Total dissolved phosphorus | A filtered sample requires the specified conversion and measurement procedure; the result concerns the dissolved fraction. |
| Total phosphorus in whole water | The sampling and conversion method must account for the relevant dissolved and particulate forms. Removing particles before analysis can change the fraction reported. |
Answers to the questions that the recorded characteristics of TP-300 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Digital Output": RS485 Modbus RTU.
Yes — recorded under "Total phosphorus in whole water": The sampling and conversion method must account for the relevant dissolved and particulate forms. Removing particles before analysis can change the fraction reported..
Yes — recorded under "Digital Output": RS485 Modbus RTU.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Online total phosphorus analyzer with digestion and colorimetry

Total Nitrogen Analyzer

BOD Sensor

Potassium Ion Selective Electrode

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | TP-300 |
| Manufacturer | Apure |
pH and Conductivity Analyzers
RS485 Modbus Dissolved Oxygen Sensor, Fluorescence Method
Price on request
pH and Conductivity Analyzers
Online UV fluorescence BOD sensor, reagent-free · Ref. : WQ-BOD-4S
Price on request
pH and Conductivity Analyzers
Portable ORP analyzer with digital electrode and touch screen · Ref. : ORP-METER
Price on request
pH and Conductivity Analyzers
Multiparameter Water Quality Sensor · Ref. : KPS-400
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details