CF-E301 – Embedded UHF RFID Module with Impinj E310 Chip

Embedded UHF RFID Module with Impinj E310 Chip

UHF RFID Readers

  • 600mA (27dbm)
  • 67mA
  • Stamp hole
  • Data Communication
Manufacturer part number
CF-E301
Manufacturer
Chafon
Environmental Parameters
Development Environment
RFID Technical Parameters
Data Communication

The Chafon CF-E301 embedded UHF RFID module is built on the Impinj E310 chip and reads up to 250 tags per second under ISO18000-6C (EPC GEN2). It integrates into handheld terminals and logistics equipment.

Product overview

Overview. The Chafon CF-E301 is an embedded UHF RFID reader module built around the Impinj E310 chip, designed to be integrated into existing equipment such as handheld terminals or logistics management systems. It operates under the ISO18000-6C (EPC GEN2) protocol.

Main characteristics. The module reads up to 250 tags per second, with a 1000-tag buffer for 96-bit EPC tags and multiple tag anti-collision. RF output power is adjustable from 0 to 27 dBm, and receive sensitivity reaches -74 dBm. Read distance is 0 to 10 meters, depending on the antenna and tag. The module provides an RSSI function to identify tag signal distance.

Interfaces and connectivity. Communication is via a TTL UART interface at 115200 bps, through a 20-pin connector. The module supports active and answer modes, and online firmware upgrade. A stamp-hole antenna port is provided.

Power and environment. The operating voltage is 3.6 to 5.5 V. Current draw is 360 mA minimum and 600 mA maximum (27 dBm), with a standby current of 67 mA. The module operates between -20 °C and +60 °C and is stored between -40 °C and +85 °C. Its dimensions are 17 × 17 × 2.5 mm.

Frequency bands. The module covers 902 to 928 MHz (US) and 865 to 868 MHz (EU), using either frequency hopping spread spectrum (FHSS) or fixed frequency transmission.

Development. An SDK is supplied, including demo software, API, examples and user manual. Supported development languages are C#, Delphi, Java, Python and VB.

Typical uses. Logistics and warehouse management, clothing management, and integration into handheld terminals and equipment. The manufacturer recommends good heat dissipation: the module must be in full contact with the reader's base plate, with thermal grease applied to the contact surface.

See all specifications

Highlights

  • Cooling method — External cooling — SDK: Demo software, API, examples, user manual
  • Environmental Parameters: Development Environment
  • Frequency — 902~928MHz (US)865~868MHz (EU) — Antenna port: Stamp hole
  • Operating Humidity: Physical parameters
  • Operating temperature — -20℃~+60℃ — Development language: C#, Delphi, Java, Python, VB and other languages
  • Protocol — ISO18000-6C (EPC GEN2) — Communication interface: TTL Uart interface, baud rate 115200bps

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range C#, Delphi, Java, Python, VB and other languages — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All UHF RFID Readers
Request a quote