CF-E302 – Embedded UHF RFID Module with Impinj E310 Chip

Embedded UHF RFID Module with Impinj E310 Chip

UHF RFID Readers

  • 600mA (27dbm)
  • 67mA
  • Stamp hole
  • Data Communication
Manufacturer part number
CF-E302
Manufacturer
Chafon
Environmental Parameters
Development Environment
RFID Technical Parameters
Data Communication

The CF-E302 is an embedded UHF RFID reader module designed for integration into handheld terminals and equipment, featuring an Impinj E310 chip and a TTL UART interface.

Product overview

CF-E302 embedded UHF RFID reader module. The Chafon CF-E302 is a UHF RFID reader module measuring 21 x 21 x 3.5 mm, based on the Impinj E310 chip engine and designed for integration into other equipment.

Performance. The module reaches a maximum inventory speed of 250 tags/s and has a buffer of 1000 tags with 96-bit EPC. It supports multiple tag anti-collision and includes an RSSI indicator to identify tag signal distance. The read range is 0 to 10 metres, depending on the antenna and tag used.

Protocol and radio frequency. The module operates according to ISO18000-6C (EPC GEN2) in the 902~928 MHz (US) and 865~868 MHz (EU) bands. Its RF output power is adjustable from 0 to 27 dBm, with a receive sensitivity of -74 dBm. It can work in active mode or answer mode, and in wide spectrum frequency hopping (FHSS) or fixed frequency transmission mode.

Interfaces and connectivity. Communication is handled through a TTL UART interface at 115200 bps. The module provides a 20-pin connector and a stamp-hole antenna port.

Power and environment. The operating voltage ranges from 3.6 to 5.5 V. Current consumption is 67 mA in standby, 360 mA minimum and 600 mA maximum in operation at 27 dBm. The module supports an operating temperature range of -20 to +60 °C and a storage range of -40 to +85 °C.

Development. The kit includes an SDK with demo software, API, examples and user manual. Supported development languages are C#, Delphi, Java, Python and VB, and online firmware upgrade is supported.

Typical uses. The manufacturer indicates applications in handheld device embedding, equipment integration, logistics management and clothing management. For thermal integration, the module should be in full contact with the reader base plate, with thermal grease applied to the contact surface.

See all specifications

Highlights

  • Cooling method — External cooling — SDK: Demo software, API, examples, user manual
  • Environmental Parameters: Development Environment
  • Frequency — 902~928MHz (US)865~868MHz (EU) — Antenna port: Stamp hole
  • Operating Humidity: Physical parameters
  • Operating temperature — -20℃~+60℃ — Development language: C#, Delphi, Java, Python, VB and other languages
  • Protocol — ISO18000-6C (EPC GEN2) — Communication interface: TTL Uart interface, baud rate 115200bps

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range C#, Delphi, Java, Python, VB and other languages — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All UHF RFID Readers
Request a quote