CF-E701 – UHF RFID Embedded Module with Impinj E710 Chip

UHF RFID Embedded Module with Impinj E710 Chip

UHF RFID Readers

  • 600mA (27dbm)
  • 67mA
  • Stamp hole
  • Data Communication
Manufacturer part number
CF-E701
Manufacturer
Chafon
Environmental Parameters
Development Environment
RFID Technical Parameters
Data Communication

The Chafon CF-E701 is an embedded UHF RFID reader module based on the Impinj E710 chip, designed to be integrated into equipment, handheld devices or logistics management systems.

Product overview

Overview. The Chafon CF-E701 is an embedded UHF RFID reader module (ISO18000-6C, EPC GEN2 protocol) built on the Impinj E710 chip, designed to be integrated into existing equipment.

Main characteristics. The module reaches a maximum inventory speed of 1100 tags/s, has a tag buffer of 1000 tags at 96-bit EPC and supports multiple-tag anti-collision. It operates in active or answer mode, with adjustable RF output power from 0 to 27 dBm and receive sensitivity of -87 dBm. The RSSI function identifies the distance of the tag signal.

Frequencies and interfaces. The module covers the 902~928 MHz (US) and 865~868 MHz (EU) bands, with a stamp hole antenna port. Communication uses a TTL UART interface at 115200 bps on a 20-pin connector. Online firmware upgrade is supported.

Power and environment. The module runs from 3.6 to 5.5 V. Its consumption is 67 mA in standby, 360 mA minimum in operation and up to 600 mA at 27 dBm. It supports operating temperatures from -20 °C to +60 °C and storage temperatures from -40 °C to +85 °C. Cooling is external, and its size is 17 × 17 × 2.5 mm.

Development. An SDK is supplied, including demo software, an API, examples and a user manual. Development is possible in C#, Delphi, Java, Python, VB and other languages.

Typical uses. Integration into handheld devices, equipment, logistics management or clothing management, according to the applications cited by the manufacturer.

Integration. The manufacturer recommends a heat dissipation design ensuring full contact between the module and the reader's base plate, with thermal grease applied to the contact surface.

See all specifications

Highlights

  • Cooling method — External cooling — SDK: Demo software, API, examples, user manual
  • Environmental Parameters: Development Environment
  • Frequency — 902~928MHz (US)865~868MHz (EU) — Antenna port: Stamp hole
  • Operating Humidity: Physical parameters
  • Operating temperature — -20℃~+60℃ — Development language: C#, Delphi, Java, Python, VB and other languages
  • Protocol — ISO18000-6C (EPC GEN2) — Communication interface: TTL Uart interface, baud rate 115200bps

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range C#, Delphi, Java, Python, VB and other languages — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All UHF RFID Readers
Request a quote