CM-FX6 – Quad-core i.MX6 ARM Cortex-A9 system on module

Quad-core i.MX6 ARM Cortex-A9 system on module

System on Modules (SoM) & Computer on Modules (CoM)

  • -; 24; 24; 100
  • +
  • CxxxM ND
  • ND C1000
Manufacturer part number
CM-FX6
Manufacturer
CompuLab

The CompuLab CM-FX6 is a system on module (SoM) built around the NXP i.MX6 dual-core Cortex-A9 processor running at 1 GHz. It integrates memory, storage and numerous serial interfaces for compact embedded systems.

Product overview

CompuLab CM-FX6. The CM-FX6 is a system on module (SoM) and computer on module (CoM) from CompuLab, built around the Freescale i.MX6 dual-core Cortex-A9 MPCore processor at 1 GHz, with 1 MB of shared L2 cache and a DRAM bus up to 64 bits wide.

Main characteristics. The module measures 75 x 65 x 6 mm and weighs 60 grams. It operates from a supply voltage of 3.3 to 5.5 VDC with active power consumption of 2.0 to 8.0 W, depending on board configuration, CPU frequency and system load. It includes a real-time clock (RTC) powered by an external lithium battery and a 2 MB boot flash on an SPI interface. Its DDR3 RAM ranges from 256 MB to 4 GB, on a 16 to 64-bit bus.

Interfaces and connectivity. The module provides up to 2 CAN bus interfaces (FlexCAN) at 3.3 V levels, up to 5 UART ports compatible with TIA/EIA-232-F at up to 5.0 Mbps including one RS-232 port, up to 3 I2C interfaces (up to 400 Kbps), up to 4 enhanced configurable SPI (eCSPI) bus interfaces in slave and master modes, and up to 112 multifunction signals usable as GPIO. It also offers 1 OTG and 1 host USB 2.0 high-speed port at 480 Mbps for the U2 version, or 1 OTG and 4 host ports for the U5 version, a PCI Express Gen 2.0 interface, a SATA II interface at 3.0 Gbps, and up to 3 MMC/SD/SDIO interfaces at 3 V levels. For audio, it integrates HDMI audio output, S/PDIF input and output and up to 3 I2S interfaces. The TSC2046 touchscreen controller supports 4-wire resistive panels, depending on the selected configuration.

Environment. The module supports an operating case temperature of 0 to 70 °C in the commercial version, -20 to 70 °C in the extended version and -40 to 85 °C in the industrial version. Its storage temperature is -40 to 85 °C and its relative humidity range is 10% to 90% in operation. It withstands shocks of 50 G for 20 ms and vibrations of 20 G between 0 and 600 Hz. Its MTTF is greater than 200,000 hours.

Typical uses. With its numerous serial interfaces and its CAN and SPI buses, the CM-FX6 suits the design of compact embedded systems communicating with sensors, actuators or programmable logic controllers. Its HDMI output and its LVDS or RGB interface, depending on configuration, also make it suitable for human-machine interfaces and embedded displays. It can be integrated on a dedicated carrier or on a carrier board developed by the customer.

Integration. The board is supplied with a reference carrier and technical documentation for application development. Supported operating systems include Yocto Linux, Android and Windows Embedded Compact 7, with associated BSPs and development documentation.

See all specifications

Highlights

  • Dimensions: 75 x 65 x 6 mm
  • Supply voltage: 3.3 - 5.5 VDC
  • Analog Audio — On-board audio codec with analog stereo output, stereo input and electret microphone support: A
  • Bluetooth — Bluetooth 3.0 + High Speed (HS) (also compliant with Bluetooth 2.1 + EDR): WB
  • CAN bus — Up to 2 CAN bus interfaces (FlexCAN), 3.3V levels: +
  • Connectors: 2 x 140 pin, 0.6 mm

Good to know before integrating

  • Power: plan for a supply compatible with 3.3 - 5.5 VDC.
  • Recorded network/IO connectivity: -; 3.8 — confirm your host system has the matching driver or protocol stack.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote