Deye split-phase hybrid inverter rated 5 to 12 kW, combining photovoltaic input and low-voltage battery management for solar installations with energy storage.
Operating Temperature Range-40 to +60℃, >45℃ Derating
Power Factor Adjustment Range0.8 leading to 0.8 lagging
Communication interfaceRS485/RS232/CAN
DC Injection Current<0.5%ln
Max. AC Input/Output Current(A)41.7
Max. Input Short Circuit Current (A)60+60+60
Product overview
Deye SUN-5/6/8/10/12K-SG05LP2-US-SM2/SM3. This split-phase hybrid inverter from manufacturer Deye covers ratings from 5 to 12 kW and manages both photovoltaic input and battery storage.
Main characteristics. Three MPPT inputs (3 MPPT, 2+2+2 strings), MPPT voltage range of 150 to 425 V, maximum efficiency of 97.6% and Euro efficiency of 96.5%. The rated AC output current is 41.7 A for a 120/240 V or 120/208 V grid at 60 Hz. Peak power in off-grid mode reaches 2 times the rated power for 10 s.
Battery and interfaces. Compatible with lead-acid or lithium-ion batteries over a 40 to 60 V range, with charging self-adapted to the BMS for lithium-ion. Communication via RS485, RS232 or CAN, LCD display.
Protection and compliance. Integrated protection against DC reverse polarity, AC overcurrent and overvoltage, AC short circuit and anti-islanding, with insulation impedance and residual current detection. Arc fault circuit interrupter (AFCI) optional. Compliant with IEEE 1547.1, SRD V2.0, FCC and UL 1741. Ingress protection TYPE 3R.
Environment and installation. Operating range -40 to +60 °C with derating above 45 °C, intelligent air cooling, noise below 45 dB, permissible altitude up to 3000 m. Dimensions 386×606.5×240 mm, weight 29.2 kg.
Typical uses. Residential or commercial photovoltaic installations with battery storage, supervised through the communication port. Available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for SM3, with where it comes from. Use the filters to find one quickly.
All specifications (34)
Characteristic
Value
Battery Type
Lead-acid or Lithium-ion
Battery Voltage Range (V)
40-60
Cabinet Size (WxHxD mm)
386×606.5×240 (Excluding Connectors and Brackets)
Charging Strategy for Li-ion Battery
Self-adaption to BMS
Communication interface
RS485/RS232/CAN
DC Injection Current
<0.5%ln
Euro Efficiency
96.5%
Grid Regulation
IEEE 1547.1, SRD V2.0
Ingress Protection(IP) Rating
TYPE 3R
Integrated
DC Reverse Polarity Protection, AC Output Overcurrent Protection, Thermal Protection,; AC Output Overvoltage Protection, AC Output Short Circuit Protection, DC Component Monitoring,; Arc Fault Circuit Interrupter (AFCI) (optional), Anti-islanding Protection, DC Switch,; Insulation Impedance Detection, Residual Current Detection
Inverter Topology
Non-Isolated (solar), Isolated (battery)
LCD/LED Display
LCD
Max. AC Input/Output Current(A)
41.7
Max. Efficiency
97.6%
Max. Input Short Circuit Current (A)
60+60+60
Max. Operating PV Input Current(A)
32+32+32
MPPT efficiency
>99%
MPPT Voltage Range (V)
150-425
No. of MPP Trackers/No. of Strings MPP Tracker
3/2+2+2
Noise (dB)
<45
Operating Temperature Range
-40 to +60℃, >45℃ Derating
Over Voltage Category
OVC II(DC),OVC IV(AC)
Peak Power (off-grid)(W)
2 times of rated power, 10s
Permissible Altitude
3000m
Permissible Ambient Humidity
0-100%
Power Factor Adjustment Range
0.8 leading to 0.8 lagging
Rated AC Input/Output Current(A)
41.7
Rated Input/Output Grid Frequency/Range(Hz)
60/55-65
Rated Input/Output Voltage
120/240, 120/208 0.88Un<U<1.1Un 2L+N+PE
Safety EMC/Standard
FCC, UL 1741
Surge Protection Level
TYPE II(DC), TYPE II(AC)
Total Current Harmonic Distortion THDi
<3% (of nominal power)
Type Of Cooling
Intelligent Air Cooling
Weight (kg)
29.2
No specification matches.
Last verification : 2026-11-02
Technical documentation
Official documents and the technical data recorded for SM3. For a missing document or a specific revision, our experts send it to you.
Deye split-phase hybrid inverter rated 5 to 12 kW, combining photovoltaic input and low-voltage battery management for solar installations with energy storage.
Operating Temperature Range-40 to +60℃, >45℃ Derating
Power Factor Adjustment Range0.8 leading to 0.8 lagging
Communication interfaceRS485/RS232/CAN
DC Injection Current<0.5%ln
Max. AC Input/Output Current(A)41.7
2. Datasheet extract (recorded values)
Parameter
Value
Battery Type
Lead-acid or Lithium-ion
Battery Voltage Range (V)
40-60
Cabinet Size (WxHxD mm)
386×606.5×240 (Excluding Connectors and Brackets)
Charging Strategy for Li-ion Battery
Self-adaption to BMS
Communication interface
RS485/RS232/CAN
DC Injection Current
<0.5%ln
Euro Efficiency
96.5%
Grid Regulation
IEEE 1547.1, SRD V2.0
Ingress Protection(IP) Rating
TYPE 3R
Integrated
DC Reverse Polarity Protection, AC Output Overcurrent Protection, Thermal Protection,; AC Output Overvoltage Protection, AC Output Short Circuit Protection, DC Component Monitoring,; Arc Fault Circuit Interrupter (AFCI) (optional), Anti-islanding Protection, DC Switch,; Insulation Impedance Detection, Residual Current Detection
Inverter Topology
Non-Isolated (solar), Isolated (battery)
LCD/LED Display
LCD
Max. AC Input/Output Current(A)
41.7
Max. Efficiency
97.6%
Max. Input Short Circuit Current (A)
60+60+60
Max. Operating PV Input Current(A)
32+32+32
MPPT efficiency
>99%
MPPT Voltage Range (V)
150-425
No. of MPP Trackers/No. of Strings MPP Tracker
3/2+2+2
Noise (dB)
<45
Operating Temperature Range
-40 to +60℃, >45℃ Derating
Over Voltage Category
OVC II(DC),OVC IV(AC)
Peak Power (off-grid)(W)
2 times of rated power, 10s
Permissible Altitude
3000m
Permissible Ambient Humidity
0-100%
Power Factor Adjustment Range
0.8 leading to 0.8 lagging
Rated AC Input/Output Current(A)
41.7
Rated Input/Output Grid Frequency/Range(Hz)
60/55-65
Rated Input/Output Voltage
120/240, 120/208 0.88Un<U<1.1Un 2L+N+PE
Safety EMC/Standard
FCC, UL 1741
Surge Protection Level
TYPE II(DC), TYPE II(AC)
Total Current Harmonic Distortion THDi
<3% (of nominal power)
Type Of Cooling
Intelligent Air Cooling
Weight (kg)
29.2
Integration
Points to check before using SM3 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Thermalrated operating range -40 to +60℃, >45℃ Derating — check it against the installation environment.
Power and communication
Battery Type
Lead-acid or Lithium-ion
Battery Voltage Range (V)
40-60
Charging Strategy for Li-ion Battery
Self-adaption to BMS
DC Injection Current
<0.5%ln
Max. AC Input/Output Current(A)
41.7
Max. Input Short Circuit Current (A)
60+60+60
Max. Operating PV Input Current(A)
32+32+32
MPPT Voltage Range (V)
150-425
Over Voltage Category
OVC II(DC),OVC IV(AC)
Peak Power (off-grid)(W)
2 times of rated power, 10s
Power Factor Adjustment Range
0.8 leading to 0.8 lagging
Rated AC Input/Output Current(A)
41.7
Rated Input/Output Voltage
120/240, 120/208 0.88Un<U<1.1Un 2L+N+PE
Total Current Harmonic Distortion THDi
<3% (of nominal power)
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range -40 to +60℃, >45℃ Derating — check it against the installation environment.
Applications and use cases
Architectures in which SM3 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Solar panels produce most when nobody is home, and the surplus goes to the grid. A battery with its inverter stores this energy and returns it in the evening, with a meter measuring what the home draws
To check
Panel power and the inverter compatibility of the battery
Usable capacity compared with the evening and night consumption
Local grid connection rules for balcony and home systems
Solar production, storage and charging points on one site are often managed separately. Inverters, batteries, MPPT controllers, meters and chargers form a local energy system that shares production between users
To check
Regulatory framework for collective self-consumption in the country
Energy management system steering storage and charging
Metering accuracy for sharing between participants
Associated system blocks
ProductionStorageMeteringCharging
Need a complete solution?
Send a request for SM3 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDeye
SM3
Split-phase hybrid solar inverter 5-12 kW, 3 MPPT, low-voltage battery
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details