DFR0911
2-Channel Level Converter 12V to 3.3V

- Module Supply Voltage
- 3.3V
- Sensor Input Voltage
- 12V
- Output Current
- no more than 50mA for each channel
- Indicator
- SMD LED
2-Channel Level Converter 12V to 3.3V
Educational STEM Coding & Sensor Starter Packs
Two-channel level converter module that translates 12V signals to 3.3V with optocoupler isolation, for connecting industrial sensors to a 3.3V controller.
Overview. The DFRobot DFR0911 is a two-channel level converter that shifts 12V signals down to 3.3V with optocoupler isolation. It is designed for industrial sensors that cannot be connected directly to an Arduino board or a 3.3V input.
Main characteristics. Each input channel is optocoupler-isolated and provides a PNP output (NPN to PNP conversion is also available), with an output current of no more than 50mA per channel. The module carries an SMD indicator LED. The input signal level is 12V and the output signal level is 3.3V.
Interfaces and connectivity. The module has two optocoupler-isolated input channels, supporting common anode, common cathode and differential signal inputs. The output is PNP type.
Power and environment. The module supply voltage is 3.3V, and the module DC supply positive equals the signal output voltage. The module ships with a shell measuring 40 × 87 × 39 mm, fitting standard rails, with 3 mm screw holes.
Typical uses. Signal isolation, PLC signal level conversion, NPN to PNP signal conversion, polarity conversion and signal level voltage conversion.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0911, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Indicator | SMD LED |
| Input Channel | 2-channel Optocoupler Isolation |
| Input Signal Level | 12V |
| Installation Specification | With Shell (Fit on standard rails) |
| Module Supply Voltage | 3.3V |
| Output Current | no more than 50mA for each channel |
| Output signal | PNP Output (NPN to PNP available) |
| Output Signal Level | 3.3V |
| Sensor Input Voltage | 12V |
| Size of Bare Board | 38*72*19mm/1.50*2.83*0.75” |
| Size of Converter with Shell | 40*87*39mm/1.57*3.43*1.54” |
| Size of Screw Hole | 3mm |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0911. For a missing document or a specific revision, our experts send it to you.
Two-channel level converter module that translates 12V signals to 3.3V with optocoupler isolation, for connecting industrial sensors to a 3.3V controller.
| Parameter | Value |
|---|---|
| Indicator | SMD LED |
| Input Channel | 2-channel Optocoupler Isolation |
| Input Signal Level | 12V |
| Installation Specification | With Shell (Fit on standard rails) |
| Module Supply Voltage | 3.3V |
| Output Current | no more than 50mA for each channel |
| Output signal | PNP Output (NPN to PNP available) |
| Output Signal Level | 3.3V |
| Sensor Input Voltage | 12V |
| Size of Bare Board | 38*72*19mm/1.50*2.83*0.75” |
| Size of Converter with Shell | 40*87*39mm/1.57*3.43*1.54” |
| Size of Screw Hole | 3mm |
Points to check before using DFR0911 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Module Supply Voltage | 3.3V |
| Output Current | no more than 50mA for each channel |
| Sensor Input Voltage | 12V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0911 can answer. A question is not asked when nothing is recorded to answer it.
3.3V (source: Module Supply Voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
2-Channel Level Converter 12V to 3.3V

2-Channel Optocoupler-Isolated Level Converter (12V to 5V)

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0911 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details