DFR0912
2-Channel Optocoupler-Isolated Level Converter, 12V to 5V

- Module Supply Voltage
- 5V
- Sensor Input Voltage
- 12V
- Output Current
- no more than 50mA for each channel
- Indicator
- SMD LED
2-Channel Optocoupler-Isolated Level Converter, 12V to 5V
Educational STEM Coding & Sensor Starter Packs
Two-channel optocoupler-isolated level converter that translates 12V signals to 5V, linking industrial sensors to 5V control electronics.
Overview. The DFRobot DFR0912 is a two-channel level converter with optocoupler-isolated inputs that translates 12V signals to 5V. It acts as an interface between 12V sensors and 5V logic platforms.
Main characteristics. Each channel delivers an output current of no more than 50 mA. The output is PNP, with NPN to PNP conversion available, and each channel is indicated by an SMD LED.
Power and signal levels. The module is supplied at 5V and its output signal level is 5V. The sensor input voltage is 12V.
Isolation and mounting. Optocoupler isolation separates high-voltage sensor circuits from low-voltage control circuits. The module comes with a shell, fits standard rails and has 3 mm screw holes.
Dimensions. The bare board measures 38 × 72 × 19 mm and the converter with shell 40 × 87 × 39 mm.
Typical uses. The module allows 12V sensor or PLC outputs to be read safely by a 5V microcontroller such as an Arduino, in electrical cabinets and control systems.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for DFR0912, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Indicator | SMD LED |
| Input Channel | 2-channel Optocoupler Isolation |
| Input Signal Level | 12V |
| Installation Specification | With Shell (Fit on standard rails) |
| Module Supply Voltage | 5V |
| Output Current | no more than 50mA for each channel |
| Output signal | PNP Output (NPN to PNP available) |
| Output Signal Level | 5V |
| Sensor Input Voltage | 12V |
| Size of Bare Board | 38*72*19mm/1.50*2.83*0.75” |
| Size of Converter with Shell | 40*87*39mm/1.57*3.43*1.54” |
| Size of Screw Hole | 3mm |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for DFR0912. For a missing document or a specific revision, our experts send it to you.
Two-channel optocoupler-isolated level converter that translates 12V signals to 5V, linking industrial sensors to 5V control electronics.
| Parameter | Value |
|---|---|
| Indicator | SMD LED |
| Input Channel | 2-channel Optocoupler Isolation |
| Input Signal Level | 12V |
| Installation Specification | With Shell (Fit on standard rails) |
| Module Supply Voltage | 5V |
| Output Current | no more than 50mA for each channel |
| Output signal | PNP Output (NPN to PNP available) |
| Output Signal Level | 5V |
| Sensor Input Voltage | 12V |
| Size of Bare Board | 38*72*19mm/1.50*2.83*0.75” |
| Size of Converter with Shell | 40*87*39mm/1.57*3.43*1.54” |
| Size of Screw Hole | 3mm |
Points to check before using DFR0912 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Module Supply Voltage | 5V |
| Output Current | no more than 50mA for each channel |
| Sensor Input Voltage | 12V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of DFR0912 can answer. A question is not asked when nothing is recorded to answer it.
5V (source: Module Supply Voltage).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
2-Channel Optocoupler-Isolated Level Converter, 12V to 5V

2-Channel Level Converter (12V to 3.3V)

5pcs 1.5V-6V Type Miniature DC Motors

Multicolored Dupont Wire Kit for Arduino® (120pcs)

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | DFR0912 |
| Manufacturer | DFRobot |
Educational STEM Coding & Sensor Starter Packs
5 V Power Booster and Charger Module for Single-Cell Lithium Battery · Ref. : DFR0446
Price on request
Educational STEM Coding & Sensor Starter Packs
30 kg·cm magnetic encoder bus servo 360° · Ref. : 21100250
Price on request
Educational STEM Coding & Sensor Starter Packs
ROS2 Omnidirectional Mecanum Wheel Mobile Robot · Ref. : 3000200901
Price on request
Educational STEM Coding & Sensor Starter Packs
ESP32 robot chassis expansion shield
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details