Two-module GNSS-RTK positioning kit with a base station and a mobile rover linked by a LoRa 915 MHz radio, for centimeter-level location accuracy.
Antenna interfaceSMA
GNSS Antenna InterfaceSMA
Power InterfaceGravity interface, 3.3~5V
Concurrent Tracking Constellations4+ QGNSS
Velocity accuracy0.03 m/s
BDSB1l, B2a
Product overview
Overview. The DFRobot KIT0198-US is a GNSS-RTK (Real-Time Kinematics) system made of a base station and a rover, linked by a pre-configured LoRa radio link, for centimeter-level location accuracy.
Main characteristics. The receiver tracks GPS, GLONASS, Galileo, BDS and QZSS, with a navigation update rate of 1 Hz and a velocity accuracy of 0.03 m/s. RTK convergence time is under 10 s. Corrections improve positioning and velocity accuracy, and the SBAS systems WAAS, EGNOS, MSAS and GAGAN are supported.
Interfaces and connectivity. The module provides an SMA antenna interface and an I2C / UART output. The NMEA 0183 and RTCM 3.x protocols are supported, with a raw data output rate of 1 Hz.
Power. The kit is powered through a terminal block (5 to 10 V) or a Type-C connector, with a Gravity power interface at 3.3 to 5 V. Weight is 700 g.
Typical uses. The kit suits applications requiring precise positioning, such as autonomous vehicle navigation, land surveying or device tracking, as described by the manufacturer.
Integration. The NMEA 0183 output and UART interface allow connection to a microcontroller or an on-board computer. The product is available on quotation from Atlas Electronics.
Two-module GNSS-RTK positioning kit with a base station and a mobile rover linked by a LoRa 915 MHz radio, for centimeter-level location accuracy.
Antenna interfaceSMA
GNSS Antenna InterfaceSMA
Power InterfaceGravity interface, 3.3~5V
Concurrent Tracking Constellations4+ QGNSS
Velocity accuracy0.03 m/s
2. Datasheet extract (recorded values)
Parameter
Value
Antenna interface
SMA
BDS
B1l, B2a
Concurrent Tracking Constellations
4+ QGNSS
Default Constellations
GPS + GLONASS + Galileo + BDS + QZSS
Function
Base Station
Galileo
E1, E5a
GLONASS
L1
GNSS Antenna Interface
SMA
GPS/QZSS
L1 C/A, L5
Navigation Update Rate (RTK)
1 Hz
Output signal
I2C / UART
Power Input
Terminal Block (5~10V); Type-C
Power Interface
Gravity interface, 3.3~5V
Protocol
NMEA 0183 / RTCM 3.x
Raw Data Output Rate
1 Hz
Raw Data Output Rate (GNSS)
1 Hz
RTK Convergence Time
< 10 s
SBAS
WAAS, EGNOS, MSAS, GAGAN
Velocity accuracy
0.03 m/s
Weight
700g
Applications and use cases
Architectures in which KIT0198-US can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Surveying and ground monitoring need centimetre positions. RTK GNSS receivers used as base and rover, or RTK modules built into equipment, provide them
To check
Accuracy required and the correction source (own base or network)
Inspecting roofs, solar farms or lines means scaffolding or long walks. Drone airframes with their power electronics, thermal cameras and RTK positioning let inspections be done from the air
To check
Flight regulations and pilot qualification in the country
Thermal resolution and sensitivity needed
Flight time and payload weight
Associated system blocks
Drone platformThermal imagingPositioning
Need a complete solution?
Send a request for KIT0198-US and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details