Product overview
Overview. The DFRobot SEN0331 Fermion is a digital temperature and humidity sensor in breakout format, built around the Sensirion SHT30-DIS-B chip. It combines capacitive humidity sensing and band-gap temperature measurement on a single chip.
Main characteristics. The humidity detection range spans 0 %RH to 100 %RH, with an accuracy of ±2 %RH from 0 %RH to 100 %RH at 25 °C. The temperature detection range runs from -40 °C to 125 °C, with a typical accuracy of ±0.2 °C between 0 °C and 90 °C. Operating current is below 1.5 mA.
Interfaces and connectivity. Communication uses an I2C bus. The module is compatible with 3.3 V and 5 V controllers and integrates with common platforms such as Arduino, micro:bit and ESP32.
Power and dimensions. The operating voltage is between 2.15 V and 5.5 V. The board measures 19 x 16 mm, with 2 mm mounting holes spaced 15 mm apart.
Typical uses. This module suits environmental monitoring, battery-powered sensor nodes and automation systems requiring digital measurement of temperature and humidity.