SEN0438 – RS485 Temperature and Humidity Sensor IP34

RS485 Temperature and Humidity Sensor IP34

Temperature Sensor Modules

  • 0 ~ 99.9%RH
  • -40 ~ 120℃
  • 12 ~ 36V (DC)
  • Within 20mA
Manufacturer part number
SEN0438
Manufacturer
DFRobot
Humidity Measurement Range
0 ~ 99.9%RH
Power Supply Voltage
12 ~ 36V (DC)

Industrial temperature and humidity sensor from DFRobot with RS485 Modbus RTU output, designed for monitoring demanding environments such as greenhouses, warehouses and HVAC systems.

Product overview

DFRobot SEN0438. RS485 temperature and humidity sensor (IP34) with standard Modbus RTU protocol, intended for environmental monitoring in demanding conditions.

Measurement. The temperature measurement range is -40 to 120 ℃, with an accuracy of ± 0.3 °C at 25 °C and a display resolution of 0.1 ℃. The humidity measurement range is 0 to 99.9 %RH, with an accuracy of ± 2 %RH at 25 ℃ and a resolution of 1 %RH. The sampling cycle period is 3 seconds.

Interface and communication. The sensor provides an RS485 signal and follows the standard Modbus RTU protocol. The default baud rate is 9600. Wiring consists of a yellow wire for RS485 A, a white wire for RS485 B, a red wire for power input (12 to 36 V DC) and a black wire for GND.

Power and environment. The sensor is powered from 12 to 36 V DC, with a consumption within 20 mA. The IP34 rating protects against water splashing and does not allow immersion; a rain cover is required for outdoor use.

Drift. Sensitivity attenuation is below 0.1 ℃ per year for temperature and below 0.5 %RH per year for humidity.

Dimensions and uses. The product measures 200 mm in length by 15.7 mm in diameter and weighs 110.0 g. Its RS485 Modbus RTU output allows connection to a PLC or supervisory system for monitoring and automation applications. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Humidity accuracy: ± 2%RH (25℃)
  • Current consumption: Within 20mA
  • Baud rate: 9600 (Default)
  • Communication Protocol: standard MODBUS RTU protocol
  • Humidity Measurement Range: 0 ~ 99.9%RH
  • Output signal: RS485 signal

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 12 ~ 36V (DC).

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote