Temperature and relative humidity sensor module with I2C digital output, based on the AHT20 chip with an improved MEMS capacitive humidity element, for environmental measurement.
Operating Range0~100 %RH
Accuracy Error±2% RH
Response time8S
Hysteresis±1 %RH
I2C Address0×38
Long-term Drift<0.04℃/yr
Product overview
Overview. The DFRobot Fermion AHT20 Temperature and Humidity Sensor (Breakout) is a digital temperature and relative humidity sensor on a breakout board, built around the AHT20 chip with an improved MEMS semiconductor capacitive humidity sensor element.
Main characteristics. For relative humidity, the resolution is 0.024 %RH, the accuracy error ±2 %RH, the repeatability ±0.1 %RH, the hysteresis ±1 %RH and the non-linearity ±0.1 %RH, over an operating range of 0 to 100 %RH. For temperature, the resolution is 0.01 °C, the accuracy error ±0.3 °C, the repeatability ±0.1 °C and the hysteresis ±0.1 °C, over an operating range of -40 to 85 °C. The humidity response time is 8 s, and the temperature response time is between a minimum of 5 s and a maximum of 30 s. Long-term drift for temperature is less than 0.04 °C per year.
Interfaces and connectivity. The sensor provides an I2C digital output, with I2C address 0x38. The module includes a 2.54 mm pitch 4-pin single-row pin header supplied with the product.
Power and environment. The operating voltage is DC 2 V to 5 V. The module measures 30 mm × 20.5 mm.
Typical uses. Measurement of ambient temperature and humidity in consumer appliances, automobiles, dehumidifiers, HVAC systems, testing and inspection equipment, automatic control, data loggers and weather stations.
Integration. The module connects directly to an I2C bus, which simplifies connection to a microcontroller or an Arduino board.
Temperature and relative humidity sensor module with I2C digital output, based on the AHT20 chip with an improved MEMS capacitive humidity element, for environmental measurement.
Operating Range0~100 %RH
Accuracy Error±2% RH
Response time8S
Hysteresis±1 %RH
I2C Address0×38
2. Datasheet extract (recorded values)
Parameter
Value
Response time
8S
Accuracy Error
±2% RH
Fermion
AHT20 Temperature and Humidity Sensor (Breakout)
Hysteresis
±1 %RH
I2C Address
0×38
Long-term Drift
<0.04℃/yr
Non-linear
±0.1 %RH
Operating Range
0~100 %RH
Operating Voltage
DC2V~5V
Output signal
I2C
Repeatability
±0.1 %RH
Resolution
0.024 %RH
Applications and use cases
Architectures in which SEN0527 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A fridge that drifts at night can ruin a whole stock. Temperature loggers in cold rooms and trucks report through a gateway or a tracker and raise an alert when a threshold is crossed
To check
Temperature range and accuracy required by the product
Record keeping required by the applicable regulations
A building’s energy, comfort and occupancy data sit in separate systems. Sensors, meters and gateways feed one model of the building, room by room, to compare scenarios and steer the installations
To check
Data model and building plans available
Software platform hosting the twin
Sensor density needed for a useful model
Associated system blocks
SensorsMetersGateways
Need a complete solution?
Send a request for SEN0527 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productDFRobot
SEN0527
AHT20 Temperature and Humidity Sensor, I2C Digital Output
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details