STL-19P – 360° DTOF LiDAR sensor, 905 nm laser, 12 m range

360° DTOF LiDAR sensor, 905 nm laser, 12 m range

LiDAR Sensors

  • -10℃~40℃
  • 360°
  • UART (3.3V level)
  • 5V
Manufacturer part number
SEN0547
Manufacturer
DFRobot
Operating Temperature
-10℃~40℃
Scanning Range
360°

Compact STL-19P DTOF LiDAR sensor from DFRobot for autonomous mapping and obstacle detection over a 12 m range with 360° scanning.

Product overview

Overview. The DFRobot STL-19P DTOF LiDAR sensor is a 360° laser distance sensor designed for autonomous mapping and obstacle detection. It measures distances from 0.03 m to 12 m on an 80% reflectivity white target, and up to 8 m on a 4% reflectivity black target.

Main characteristics. The ranging frequency reaches 5000 Hz and the typical scanning frequency is 10 Hz. Average ranging accuracy is ±10 mm from 0.03 to 0.5 m, ±20 mm from 0.5 to 2 m and ±30 mm from 2 to 12 m on a white target. The laser wavelength is 895 to 915 nm, typically 905 nm. The sensor resists sunlight of 60 Klux, allowing measurements both indoors and outdoors. It uses a brushless motor, with a pitch angle of 0.5° to 2° and a yaw angle of -1° to 1°.

Interfaces and connectivity. Communication is via UART at 3.3 V level, with a baud rate of 230400. An adapter board and a USB cable are supplied. The SDK works with both ROS1 and ROS2 systems.

Power and environment. The sensor operates at 5 V with a current of 180 mA, for a product power of 0.9 W. Its operating temperature range is -10 °C to 40 °C, and its storage temperature range is -30 °C to 70 °C.

Dimensions and weight. The sensor measures 38.59 × 38.89 × 33.50 mm and weighs 47 g.

Typical uses. Home and commercial service robots, special robots, drones and industrial robots, where mapping and obstacle avoidance are required.

Integration. The kit includes the STL-19P sensor, an adapter board, a 4-pin cable and a USB cable. The product manual is available in the documentation.

See all specifications

Highlights

  • Dimensions: 38.59*38.89*33.50mm/1.52*1.53*1.32” (L*W*H)
  • Baud rate: 230400
  • Communication interface: UART (3.3V level)
  • Input Voltage: 5V
  • Laser wavelength: 895~915nm(Typical 905nm)
  • Model: STL-19P

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -10℃~40℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LiDAR Sensors
Request a quote