24 GHz FMCW radar module that detects human presence, moving or stationary, within up to 6 m, mainly for indoor use.
Operating Frequency Range24GHz-24.25GHz
InterfaceUART & GPIO (3.3V I/O level)
Average Operating Current80mA
Ambient temperature-40 to 85℃
ConnectorSH 1.27mm to DuPont 2.54
Default Baud Rate57600
Product overview
DFRobot SEN0557. The SEN0557 is a 24 GHz human presence sensing radar module from DFRobot, based on FMCW modulation.
Main characteristics. The module detects a person moving or moving slightly within a range of 0.75 m to 6 m, with a measured blind zone of 30 cm, a detection angle of ±60°, a distance resolution of 0.75 m and a sweep bandwidth of 250 MHz. It operates in the 24 GHz to 24.25 GHz frequency range.
Interfaces and connectivity. The module provides a UART interface and a GPIO output at 3.3 V I/O level, with a default baud rate of 57600. The GPIO output can be configured as high or low level. The connector is SH 1.27 mm to DuPont 2.54.
Power and environment. The module operates from DC 5 V to 12 V, with an average operating current of 80 mA. Its ambient temperature range is -40 to 85 °C. Its dimensions are 7 mm × 35 mm.
Typical uses. With its UART and GPIO outputs, the module can be connected to an Arduino or another controller for smart light control, wake-up of an advertising screen on human presence, UV light control or home security. The FMCW technology allows the module to work inside an enclosure without drilled openings.
Integration. Long, narrow 7 mm wide form factor, easy to embed in equipment. This product is available on quotation from Atlas Electronics.
24 GHz FMCW radar module that detects human presence, moving or stationary, within up to 6 m, mainly for indoor use.
Operating Frequency Range24GHz-24.25GHz
InterfaceUART & GPIO (3.3V I/O level)
Average Operating Current80mA
Ambient temperature-40 to 85℃
ConnectorSH 1.27mm to DuPont 2.54
2. Datasheet extract (recorded values)
Parameter
Value
Ambient temperature
-40 to 85℃
Average Operating Current
80mA
Connector
SH 1.27mm to DuPont 2.54
Default Baud Rate
57600
Detection Angle
±60°
Detection Distance
0.75m-6m (Measured blind zone distance: 30cm)
Dimension
7mm×35mm/0.28×1.38"
Distance resolution
0.75m
Interface
UART & GPIO (3.3V I/O level)
Modulation Mode
FMCW
Operating Frequency Range
24GHz-24.25GHz
Operating Voltage
DC 5V-12V
Sweep Bandwidth
250MHz
Applications and use cases
Architectures in which SEN0557 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Meeting rooms are booked but empty, and some areas are always full. Presence sensors, radars and counting cameras measure how spaces are really used, room by room or at entrances
To check
Presence per room or counting at entrances, or both
Privacy requirements, which favour radar or anonymous counting
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
No one to occupied, report within 0.5s Manned to unoccupied, no status output in 1-2 minutes or so
DP10: Fallen state
Two level judgement "suspected fall", "fall alarm" Suspected fall - target fall detected Output status Fall alarm - alarm reported after time T is stationary
DP11: fall alarm reporting time T
Default 3 minutes, divided into 1-30 minute setting steps
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details