SEN0565
MEMS methane CH4 gas detection sensor (breakout)

- Operating Temperature
- -10-50℃
- Detection range
- 1-10000ppm (C3H8)
- Operating Current
- <20mA
- Dimension
- 13×13 x 2.5mm/0.0.51×0.51x0.1"
MEMS methane CH4 gas detection sensor (breakout)
MEMS methane CH4 gas detection sensor in breakout format, designed for qualitative combustible gas leak monitoring and fire and safety detection systems.
Overview. The DFRobot SEN0565 is a methane CH4 gas detection sensor in breakout format, built on MEMS technology. It provides a qualitative measurement of methane concentration and also detects C3H8 and other gases.
Main characteristics. Dimensions are 13 × 13 × 2.5 mm. The detection range is 1 to 10000 ppm (C3H8). Operating current is below 20 mA at a 5 V supply, and the lifespan is 5 years or more in air. Sensitivity R0 (in air) / Rs (in 5000 ppm CH4) is 2 or more.
Output and interface. The output signal is an analog voltage, allowing direct reading by a microcontroller such as an Arduino UNO, following the wiring diagram provided by the manufacturer.
Operating conditions. The sensor operates between -10 and 50 °C, with 15 to 90 %RH humidity, non-condensing. It must be protected from volatile silicon compound vapours, corrosive gases such as H2S, SOx, Cl2 and HCl, and from contact with water, condensation and freezing.
Typical uses. The SEN0565 suits environmental monitoring to detect methane emissions or leaks, indoor air quality measurement to control ventilation or alarm systems, and industrial safety to warn of methane leaks or spills. It integrates into combustible gas leak detectors and fire and safety detection systems.
Usage limits. This sensor performs qualitative measurements only. For quantitative measurements, the manufacturer recommends the Gravity: Factory Calibrated Electrochemical Gas Sensor Series. It must not be used in systems involving personal safety, and it is advisable to preheat the module for at least 24 hours after prolonged non-use.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0565, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Detection range | 1-10000ppm (C3H8) |
| Dimension | 13×13 x 2.5mm/0.0.51×0.51x0.1" |
| Fermion | MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm) |
| Gas detected | CH4, C3H8, etc |
| Lifespan | ≥5 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 5000ppm CH4) ≥ 2 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0565. For a missing document or a specific revision, our experts send it to you.
MEMS methane CH4 gas detection sensor in breakout format, designed for qualitative combustible gas leak monitoring and fire and safety detection systems.
| Parameter | Value |
|---|---|
| Detection range | 1-10000ppm (C3H8) |
| Dimension | 13×13 x 2.5mm/0.0.51×0.51x0.1" |
| Fermion | MEMS Methane CH4 Gas Detection Sensor (Breakout, 1-10000ppm) |
| Gas detected | CH4, C3H8, etc |
| Lifespan | ≥5 years (in air) |
| Operating Current | <20mA |
| Operating Humidity | 15-90%RH (non-condensing) |
| Operating Temperature | -10-50℃ |
| Operating Voltage | 5V |
| Output signal | Analog voltage |
| Sensitivity | R0(in air)/Rs(in 5000ppm CH4) ≥ 2 |
Points to check before using SEN0565 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operating Current | <20mA |
| Operating Voltage | 5V |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SEN0565 can answer. A question is not asked when nothing is recorded to answer it.
-10-50℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
MEMS methane CH4 gas detection sensor (breakout)

Explosion-proof Methane Gas Detector Sensor with Audible-Visual Alarm

HENGKO flameproof combustible gas leak detection housing for atmospheric monitoring system

ICP DAS I

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0565 |
| Manufacturer | DFRobot |
Methane Sensors
Natural gas (methane) detector with CAN Bus interface · Ref. : CL-20A-C
Price on request
Methane Sensors
MEMS combustible methane gas sensor · Ref. : RS-CH01
Price on request
Methane Sensors
Flammable gas MOS sensor for propane, LPG and methane · Ref. : MQ-5B
Price on request
Methane Sensors
Portable combustible gas detector with color screen · Ref. : GD-02
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details