LakiBeam 1S – Industrial single-line 2D ToF LiDAR, IP65, Ethernet UDP

Industrial single-line 2D ToF LiDAR, IP65, Ethernet UDP

LiDAR Sensors

  • -25 to 60℃
  • RJ45/Type-C
  • 5.5 x 2.1mm
  • ≤2.5W
Manufacturer part number
SEN0576
Manufacturer
DFRobot
Operating Temperature
-25 to 60℃
Communication interface
RJ45/Type-C

DFRobot LakiBeam 1S single-line 2D pulsed ToF LiDAR for 270° horizontal profile scanning, with Ethernet UDP output and IP65 protection.

Product overview

Overview. The DFRobot LakiBeam 1S is a single-line 2D pulsed time-of-flight (ToF) LiDAR that scans the environmental profile over 270° in the horizontal plane, with a precision of ±2 cm within a detection range of 0 to 15 m.

Main characteristics. The module offers a sampling rate of 18 kHz (10 Hz) or 14.4 kHz (20 Hz), an adjustable angular resolution of 0.2° or 0.5°, and a VCSEL laser emitter with a smaller spot size than EEL emitters. Detection reaches at least 15 m at 70% reflectivity and at least 10 m at 10% reflectivity. The sensor weighs 160 g and measures 60 × 60 × 80 mm.

Interfaces and connectivity. The LiDAR provides an RJ45 interface and a Type-C port, with UDP/IP transmission over 100 Mbps Ethernet. It outputs distance, angle, echo intensity and time. Ethernet UDP is the default communication mode, and a USB mode is also available. A built-in web service provides dashboard monitoring, radar setup and firmware updates (OTA).

Power and environment. The operating voltage is 6 to 36 V, with a certified 12 V/1 A power adapter recommended. Power consumption is 2.5 W or less. The operating temperature range is -25 to 60 ℃, the storage range is -40 to 75 ℃, and the protection level is IP65. The sensor withstands 100 kLux of strong light and operates both indoors and outdoors.

Typical uses. The sensor suits robots, multimedia interaction and perimeter security, as the main laser for indoor robots or the oblique laser for outdoor robots. Its built-in brushless motor provides low noise and long service life.

Safety. The laser complies with Class 1 eye safety standards, the laser power received in a fixed unit of time being less than 1 mW.

See all specifications

Highlights

  • Communication interface: RJ45/Type-C
  • Data Output: Distance, angle, echo intensity, time (internal)
  • Data Output Format: Ethernet UDP/USB
  • Data Transmission Method: UDP/IP (100 Mbps Ethernet)
  • Detection Accuracy: ±2cm
  • Detection range: ≥15m@70% reflectivity, ≥10m@10% reflectivity

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -25 to 60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LiDAR Sensors
Request a quote