LakiBeam 1 – Industrial 2D ToF single-line LiDAR 270° 25 m range

Industrial 2D ToF single-line LiDAR 270° 25 m range

LiDAR Sensors

  • -25 to 60℃
  • RJ45
  • 5.5 x 2.1mm
  • ≤2W
Manufacturer part number
SEN0577
Manufacturer
DFRobot
Operating Temperature
-25 to 60℃
Communication interface
RJ45

Industrial single-line 2D ToF LiDAR with 270° horizontal scanning for environment detection up to 25 m, for robot perception and process monitoring.

Product overview

Overview. The LakiBeam 1 from DFRobot is a single-line pulsed 2D ToF LiDAR that measures the environmental profile over a 270° horizontal plane. It covers a detection range of 0 to 25 m with a precision of ±2 cm.

Main characteristics. The sensor reaches a sampling rate of up to 43.2 kHz depending on the selected update rate, a 270° scanning angle and an adjustable angular resolution of 0.1° or 0.25°. It resists 100 kLux of strong light and uses a VCSEL laser emitter, whose spot is smaller than that of EEL emitters. The motor is brushless.

Interfaces and connectivity. The device communicates over Ethernet RJ45 via UDP/IP at 100 Mbps, the default mode, or over USB. A built-in web service provides a dashboard, radar settings and firmware updates (OTA).

Power and environment. The supply voltage ranges from 9 to 36 V, with a power consumption of 2 W or less. A certified 12 V/1 A power adapter is recommended. The housing is rated IP65 and the operating temperature ranges from -25 to 60 °C.

Typical uses. The sensor suits robot environmental perception, map surveying, industrial process monitoring and perimeter security. It can serve as the main laser for indoor robots or as the oblique laser for outdoor robots.

Integration. The product is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Communication interface: RJ45
  • Data Output: Distance, angle, echo intensity, time (internal)
  • Data Output Format: Ethernet UDP/USB
  • Data Transmission Method: UDP/IP (100 Mbps Ethernet)
  • Detection Accuracy: ±2cm
  • Detection range: ≥25m@70% reflectivity, ≥15m@10% reflectivity

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Thermal: rated operating range -25 to 60℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All LiDAR Sensors
Request a quote