SEN0666
Barometric Pressure and Temperature Digital Sensor

- Pressure Measurement Range
- 30 ~ 125 kPa
- Temperature measurement range
- 0 ~ 65 °C
- Communication interface
- I2C / I3C /SPI
- Interface Form
- 2.54mm Pin Header Socket
Barometric Pressure and Temperature Digital Sensor
DFRobot digital barometric pressure and temperature sensor module based on the BMP585, intended for altitude and atmospheric pressure measurement in compact embedded systems.
Overview. The DFRobot Fermion BMP585 (reference SEN0666) is a digital barometric pressure and temperature sensor in a compact 19 × 16 mm format. It integrates the Bosch BMP585 MEMS chip and measures pressure from 30 to 125 kPa.
Main characteristics. Absolute pressure accuracy is ±0.3 hPa (typical) and relative pressure accuracy is ±0.06 hPa / 10 kPa (typical). Relative altitude accuracy is ±0.5 m / 10 kPa. Ultra-low noise is below 0.1 Pa RMS, without low-pass filter enabled. Pressure data resolution is 1 / 64, and the temperature drift coefficient is ±0.5 Pa / K. The temperature measurement range is 0 to 65 °C.
Interfaces and connectivity. The module communicates over I2C, I3C or SPI. The default I2C address is 0x47, with 0x46 as the alternative. The interface form is a 2.54 mm pin header socket.
Power and environment. The module operates at 3.3 V DC, with an operating current of 200 μA and a sleep current of 2 μA. The pressure sensing unit is protected by a gel-filled cavity that shields it from water, humidity and chemicals.
Typical uses. This barometric sensor suits low-power portable devices, drones for altitude hold and portable GPS trackers, where size and power consumption are constraints.
Integration. Mounting holes have a diameter of 2.0 mm and a spacing of 14 mm. The PCB measures 19 × 16 × 3.55 mm. This product is available on quotation from Atlas Electronics.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SEN0666, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Absolute Pressure Accuracy | ±0.3 hPa (Typ.) |
| Communication interface | I2C / I3C /SPI |
| Fermion | BMP585 High-Precision Barometric Pressure & Temperature Sensor (±0.3 hPa, I2C / SPI / I3C) |
| I2C Address | 0x47 (Default) / 0x46 |
| Interface Form | 2.54mm Pin Header Socket |
| Mounting hole diameter | 2.0 mm |
| Mounting Hole Spacing | 14 mm |
| Operating Current | 200μA |
| Operating Voltage | DC 3.3V |
| PCB Dimensions | 19×16×3.55 mm |
| Pressure Data Resolution | 1 / 64 |
| Pressure Measurement Range | 30 ~ 125 kPa |
| Relative Altitude Accuracy | ±0.5 m / 10 kPa |
| Relative Pressure Accuracy | ±0.06 hPa / 10 kPa (Typ.) |
| Sleep current | 2μA |
| Temperature Drift Coefficient | ±0.5 Pa / K |
| Temperature measurement range | 0 ~ 65 °C |
| Ultra-low Noise | < 0.1 Pa (RMS, without low-pass filter enabled) |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SEN0666. For a missing document or a specific revision, our experts send it to you.
DFRobot digital barometric pressure and temperature sensor module based on the BMP585, intended for altitude and atmospheric pressure measurement in compact embedded systems.
| Parameter | Value |
|---|---|
| Absolute Pressure Accuracy | ±0.3 hPa (Typ.) |
| Communication interface | I2C / I3C /SPI |
| Fermion | BMP585 High-Precision Barometric Pressure & Temperature Sensor (±0.3 hPa, I2C / SPI / I3C) |
| I2C Address | 0x47 (Default) / 0x46 |
| Interface Form | 2.54mm Pin Header Socket |
| Mounting hole diameter | 2.0 mm |
| Mounting Hole Spacing | 14 mm |
| Operating Current | 200μA |
| Operating Voltage | DC 3.3V |
| PCB Dimensions | 19×16×3.55 mm |
| Pressure Data Resolution | 1 / 64 |
| Pressure Measurement Range | 30 ~ 125 kPa |
| Relative Altitude Accuracy | ±0.5 m / 10 kPa |
| Relative Pressure Accuracy | ±0.06 hPa / 10 kPa (Typ.) |
| Sleep current | 2μA |
| Temperature Drift Coefficient | ±0.5 Pa / K |
| Temperature measurement range | 0 ~ 65 °C |
| Ultra-low Noise | < 0.1 Pa (RMS, without low-pass filter enabled) |
Answers to the questions that the recorded characteristics of SEN0666 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Communication interface": I2C / I3C /SPI.
Yes — recorded under "Communication interface": I2C / I3C /SPI.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Barometric Pressure and Temperature Digital Sensor

RS485 Air Temperature, Humidity and BarometricPressure Sensor(S-THP-01A) - Seeed Studio

0.2 Inch Thin Film Resistor type Pressure Sensor - FSR400 A301

Water Pressure Sensor G1/4 1.2MPa

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SEN0666 |
| Manufacturer | DFRobot |
Pressure Sensor Modules
LoRaWAN pressure sensor, SS316 transducer · Ref. : LORAWAN-PRESSURE-SENSOR
Price on request
Pressure Sensor Modules
High pressure sensor with digital I²C output · Ref. : MPM283I
Price on request
Pressure Sensor Modules
Thin film hydraulic pressure sensor 0-5 to 2000 bar · Ref. : HPT906
Price on request
Pressure Sensor Modules
Zigbee temperature, humidity and air pressure sensor · Ref. : 6979033600706
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details