JX-660T V2 – LoRa Long-Range UART Radio Module 380-450 MHz

LoRa Long-Range UART Radio Module 380-450 MHz

Sub-GHz Modules

  • LoRaWAN
  • RS-485
Manufacturer part number
TEL0115
Manufacturer
DFRobot

Long-range LoRa transceiver module with UART serial interface, 380-450 MHz band, for low-power data transmission between microcontrollers and remote nodes.

Product overview

Overview. The DFRobot JX-660T V2 LoRa radio module (reference TEL0115) is a long-range wireless transceiver operating in the 380-450 MHz band with a TTL serial UART interface. It is built around the Semtech SX1262 chip combined with an Arm Cortex-M4 ASR6601 microcontroller.

Main characteristics. LoRa spread-spectrum modulation, receiver sensitivity of -138 dBm, transmit power of 22 dBm (150 mW) adjustable over 7 levels, signal bandwidth of 125, 250 or 500 kHz, and spreading factors from 5-32 to 12-4096. UART baud rate (1200 bps to 115200 bps, 9600 bps by default) and parity (8E1, 8O1, 8N1) are configurable. Maximum packet size is 1 KB in normal mode.

Interfaces and connectivity. Antenna connected through an RF pin with 50 Ω impedance. TTL UART serial communication. Star topology with Central, Node and Passthrough modes, HEX addressing and CAD collision avoidance.

Power and environment. Operating voltage from 2.1 V to 5.5 V. Rx current below 12 mA and TX current below 125 mA at 22 dBm. Sleep current below 2.0 µA, sleep time from 0.25 s to 25 s, instant wakeup via the PA3 pin (active low). Operating temperature from -40 °C to +85 °C (industrial).

Typical uses. Remote sensor networks, industrial telemetry and long-distance IoT links, where data is sent from a microcontroller or embedded controller through the UART link.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote