Product overview
Overview. The Eletechsup CE006 RF receiver module is a super-heterodyne receiver with decoder operating at 433 MHz, using ASK/OOK modulation, intended for four-channel radio remote controls.
Main characteristics. The receiver decodes fixed codes PT2262, PT2260, PT2240 and EV1527 as well as other compatible chips. It can learn and store up to 30 different remote controls and intelligently distinguishes fixed codes from learned codes. Receiving sensitivity is -110 dBm (50 Ω), speed is below 2.4 kbps, and the maximum rate is 2.4 KHZ.
Outputs. TTL level outputs are configurable by soldering between three modes: Momentary (default), Latch and Toggle. In Momentary mode the output is active only while the button is held; in Latch mode only one of the four relays is active at a time; in Toggle mode each channel switches on and off independently.
Power and environment. The module operates from 3.3 V to 5.5 V, with a static current of 6 mA or less at DC 5 V, and works between -30 °C and +85 °C. Dimensions are 28 × 12.5 × 5 mm, and the wire antenna is 18 cm long for 433.92 MHz. Output current is 15 mA sink (low level drive) and 12 mA source (high level drive). The supply must be stable with low ripple, using multi-stage filtering (beads, inductors, capacitors).
Use and integration. The module plugs directly into an Arduino UNO, MEGA2560 or DUE and can be used with other microcontrollers (ARM, FPGA, CPLD, PIC, AVR). To learn a remote control, press the learning button for 2 seconds; hold it for 8 seconds to delete stored codes. Keep the antenna straight and away from metal objects.