64-BIT
Octa-core 64-bit Android system board with 9-inch capacitive touch LCD

- Memory
- RAM: 2GB DDR3, up to 800MHz
- Dimension
- 235.12x156.40mm(without antenna)
- Kernel version
- Linux-3.4.39; U-boot-2014.07
- LED
- Power LED(Red)*1; User LED(Green)*1
Octa-core 64-bit Android system board with 9-inch capacitive touch LCD
Maker, Prototyping, Open-Hardware & Developer Boards
FriendlyElec 64-bit Android system board with Samsung S5P6818 octa-core processor, designed for prototyping and embedded development with a 9-inch capacitive touch LCD.
FriendlyElec Smart6818. 64-bit Android system board built around the Samsung S5P6818 octa-core Cortex-A53 processor, running from 400MHz to 1.4GHz, supplied with a 9-inch capacitive touch LCD. It is a prototyping and development board for embedded systems, running Android 5.1.1 and Linux kernel 3.4.39.
Main characteristics. 2GB DDR3 RAM up to 800MHz, 16GB eMMC storage, a MicroSD slot for external storage up to 64GB, dimensions of 235.12 x 156.40mm without antenna and a weight of 565g.
Interfaces and connectivity. Gbps Ethernet with unique MAC address (RTL8211E chip), Wi-Fi 802.11a/b/g/n/ac (AP6212) with SMA antenna interface, Bluetooth 4.1 dual-mode, support for the EC20 4G module on MiniPCIe (text messages only, no voice service) with onboard IPX to SMA antenna interface and MicroSIM slot. Three USB Host ports populated from a USB 2.0 hub, one USB Type-A port, one MicroUSB Slave port for data transmission, and a 24-pin DVP camera input.
Serial, digital and audio I/O. two 3-wire RS-232 serial ports, two I2C connectors, two SPI/GPIO connectors, a debug UART port by default, microphone input and headphone output, a PWM buzzer and a 3-axis digital accelerometer. A boot selection pin chooses between eMMC and MicroSD.
Power and environment. DC 9V to 15V, 2A input, dynamic voltage scaling, software power-off and RTC alarm, CR2032 RTC battery holder, working temperature from -20°C to 70°C.
Integration. the board suits prototypes that need an RS-232 link to PLCs or other serial equipment, along with Ethernet and Wi-Fi for network communication.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for 64-BIT, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Audio | Mic In, Headphone Out, 2.0mm pitch PH-4A connector |
| Connectivity | Ethernet: Gbps Ethernet with unique MAC, RTL8211E chip; 4G Module: support EC20 4G Module (MiniPCIe interface),only for text message, no voice service; onboard IPX to SMA antenna interface; MicroSIM Card Slot x1; Wi-Fi: 802.11a/b/g/n/ac, AP6212; SMA antenna interface; Bluetooth: 4.1 dual-mode |
| CPU | Model: Samsung S5P6818; Number of Cores: Cortex-A53 Octa-Core; Frequency: 400MHz-1.4GHz |
| Dimension | 235.12x156.40mm(without antenna) |
| Kernel version | Linux-3.4.39; U-boot-2014.07 |
| LED | Power LED(Red)*1; User LED(Green)*1 |
| Memory | RAM: 2GB DDR3, up to 800MHz |
| OS Support | Android 5.1.1 |
| Others | 3-Axis Digital Accelerometer x1; PWM buzzer x1: when you want to use the buzzer please short the buzzer pins with a jumper; RTC Battery Holder x1: Onboard RTC battery holder(Model: CR2032); Working Temperature: -20℃ to 70℃ |
| Pin-header | I2C Connector x2: 2.0mm pitch PH-4A connector; SPI/GPIO x2: 2.0mm pitch PH-6A connector,it can be used as GPIO pins; Debug UART x1: 3-wire serial port (UART0), 4-Pin 2.54mm pitch header,; it is by default used as a debug serial port; RS-232 Serial Port x2: 3-wire serial port, 2.0mm pitch PH-4A connector; 3x2Pin 2.54mm pitch header(includes 1x boot selection used to select boot from eMMC or MicroSD(HIGH means booting from eMMC and LOW means booting from MicroSD), RST x1, PWRKEY x1, GND x3) |
| Power | DC 9V~15V/2A |
| Power Management | support dynamic voltage scaling, software power-off, and RTC alarm; power-on functions |
| Product Code | S5P6818 |
| Storage | eMMC: 16GB; MicroSD Slot x1: MicroSD for external storage up to 64GB |
| USB | USB Host x3: populated from USB 2.0 hub(compatible with USB 1.1); USB Type-A x1,2.0mm pitch PH-4A connector x2; USB Slave x1: MicroUSB, only for data transmission |
| User Button | Power button x1; User button x3 |
| Video Input | DVP Camera x1: 0.5mm pitch 24pin FPC seat |
| Weight | 565g |
No specification matches.
Last verification : 2026-11-06
Official documents and the technical data recorded for 64-BIT. For a missing document or a specific revision, our experts send it to you.
FriendlyElec 64-bit Android system board with Samsung S5P6818 octa-core processor, designed for prototyping and embedded development with a 9-inch capacitive touch LCD.
| Parameter | Value |
|---|---|
| Audio | Mic In, Headphone Out, 2.0mm pitch PH-4A connector |
| Connectivity | Ethernet: Gbps Ethernet with unique MAC, RTL8211E chip; 4G Module: support EC20 4G Module (MiniPCIe interface),only for text message, no voice service; onboard IPX to SMA antenna interface; MicroSIM Card Slot x1; Wi-Fi: 802.11a/b/g/n/ac, AP6212; SMA antenna interface; Bluetooth: 4.1 dual-mode |
| CPU | Model: Samsung S5P6818; Number of Cores: Cortex-A53 Octa-Core; Frequency: 400MHz-1.4GHz |
| Dimension | 235.12x156.40mm(without antenna) |
| Kernel version | Linux-3.4.39; U-boot-2014.07 |
| LED | Power LED(Red)*1; User LED(Green)*1 |
| Memory | RAM: 2GB DDR3, up to 800MHz |
| OS Support | Android 5.1.1 |
| Others | 3-Axis Digital Accelerometer x1; PWM buzzer x1: when you want to use the buzzer please short the buzzer pins with a jumper; RTC Battery Holder x1: Onboard RTC battery holder(Model: CR2032); Working Temperature: -20℃ to 70℃ |
| Pin-header | I2C Connector x2: 2.0mm pitch PH-4A connector; SPI/GPIO x2: 2.0mm pitch PH-6A connector,it can be used as GPIO pins; Debug UART x1: 3-wire serial port (UART0), 4-Pin 2.54mm pitch header,; it is by default used as a debug serial port; RS-232 Serial Port x2: 3-wire serial port, 2.0mm pitch PH-4A connector; 3x2Pin 2.54mm pitch header(includes 1x boot selection used to select boot from eMMC or MicroSD(HIGH means booting from eMMC and LOW means booting from MicroSD), RST x1, PWRKEY x1, GND x3) |
| Power | DC 9V~15V/2A |
| Power Management | support dynamic voltage scaling, software power-off, and RTC alarm; power-on functions |
| Product Code | S5P6818 |
| Storage | eMMC: 16GB; MicroSD Slot x1: MicroSD for external storage up to 64GB |
| USB | USB Host x3: populated from USB 2.0 hub(compatible with USB 1.1); USB Type-A x1,2.0mm pitch PH-4A connector x2; USB Slave x1: MicroUSB, only for data transmission |
| User Button | Power button x1; User button x3 |
| Video Input | DVP Camera x1: 0.5mm pitch 24pin FPC seat |
| Weight | 565g |
Answers to the questions that the recorded characteristics of 64-BIT can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Pin-header": I2C Connector x2: 2.0mm pitch PH-4A connector; SPI/GPIO x2: 2.0mm pitch PH-6A connector,it can be used as GPIO pins; Debug UART x1: 3-wire serial port (UART0), 4-Pin 2.54mm pitch header,; it is by default used as a debug serial port; RS-232 Serial Port x2: 3-wire serial port, 2.0mm pitch PH-4A connector; 3x2Pin 2.54mm pitch header(includes 1x boot selection used to select boot from eMMC or MicroSD(HIGH means booting from eMMC and LOW means booting from MicroSD), RST x1, PWRKEY x1, GND x3).
Yes — recorded under "Pin-header": I2C Connector x2: 2.0mm pitch PH-4A connector; SPI/GPIO x2: 2.0mm pitch PH-6A connector,it can be used as GPIO pins; Debug UART x1: 3-wire serial port (UART0), 4-Pin 2.54mm pitch header,; it is by default used as a debug serial port; RS-232 Serial Port x2: 3-wire serial port, 2.0mm pitch PH-4A connector; 3x2Pin 2.54mm pitch header(includes 1x boot selection used to select boot from eMMC or MicroSD(HIGH means booting from eMMC and LOW means booting from MicroSD), RST x1, PWRKEY x1, GND x3).
Yes — recorded under "Pin-header": I2C Connector x2: 2.0mm pitch PH-4A connector; SPI/GPIO x2: 2.0mm pitch PH-6A connector,it can be used as GPIO pins; Debug UART x1: 3-wire serial port (UART0), 4-Pin 2.54mm pitch header,; it is by default used as a debug serial port; RS-232 Serial Port x2: 3-wire serial port, 2.0mm pitch PH-4A connector; 3x2Pin 2.54mm pitch header(includes 1x boot selection used to select boot from eMMC or MicroSD(HIGH means booting from eMMC and LOW means booting from MicroSD), RST x1, PWRKEY x1, GND x3).
Yes — recorded under "Pin-header": I2C Connector x2: 2.0mm pitch PH-4A connector; SPI/GPIO x2: 2.0mm pitch PH-6A connector,it can be used as GPIO pins; Debug UART x1: 3-wire serial port (UART0), 4-Pin 2.54mm pitch header,; it is by default used as a debug serial port; RS-232 Serial Port x2: 3-wire serial port, 2.0mm pitch PH-4A connector; 3x2Pin 2.54mm pitch header(includes 1x boot selection used to select boot from eMMC or MicroSD(HIGH means booting from eMMC and LOW means booting from MicroSD), RST x1, PWRKEY x1, GND x3).
Yes — recorded under "Connectivity": Ethernet: Gbps Ethernet with unique MAC, RTL8211E chip; 4G Module: support EC20 4G Module (MiniPCIe interface),only for text message, no voice service; onboard IPX to SMA antenna interface; MicroSIM Card Slot x1; Wi-Fi: 802.11a/b/g/n/ac, AP6212; SMA antenna interface; Bluetooth: 4.1 dual-mode.
Yes — recorded under "Connectivity": Ethernet: Gbps Ethernet with unique MAC, RTL8211E chip; 4G Module: support EC20 4G Module (MiniPCIe interface),only for text message, no voice service; onboard IPX to SMA antenna interface; MicroSIM Card Slot x1; Wi-Fi: 802.11a/b/g/n/ac, AP6212; SMA antenna interface; Bluetooth: 4.1 dual-mode.
Yes — recorded under "Connectivity": Ethernet: Gbps Ethernet with unique MAC, RTL8211E chip; 4G Module: support EC20 4G Module (MiniPCIe interface),only for text message, no voice service; onboard IPX to SMA antenna interface; MicroSIM Card Slot x1; Wi-Fi: 802.11a/b/g/n/ac, AP6212; SMA antenna interface; Bluetooth: 4.1 dual-mode.
Yes — recorded under "Connectivity": Ethernet: Gbps Ethernet with unique MAC, RTL8211E chip; 4G Module: support EC20 4G Module (MiniPCIe interface),only for text message, no voice service; onboard IPX to SMA antenna interface; MicroSIM Card Slot x1; Wi-Fi: 802.11a/b/g/n/ac, AP6212; SMA antenna interface; Bluetooth: 4.1 dual-mode.
Yes — recorded under "USB": USB Host x3: populated from USB 2.0 hub(compatible with USB 1.1); USB Type-A x1,2.0mm pitch PH-4A connector x2; USB Slave x1: MicroUSB, only for data transmission.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Octa-core 64-bit Android system board with 9-inch capacitive touch LCD

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 64-BIT |
| Manufacturer | FriendlyElec |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Boost converter module 3.3 V to 12 V 50 mA · Ref. : 110155
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details