Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

BPR-01 – Buzzer BPR-01

Buzzer

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
BPR-01
Manufacturer
FriendlyElec

FriendlyElec BPR-01, listed under “Maker, Prototyping, Open-Hardware & Developer Boards”.

Product overview

Buzzer BPR-01

0 reviews / Write a review

(USD)

Buyer responsible for payment of duty.

Brand: FriendlyElec

Product Code: BPR-01

Qty:

Description

Reviews (0)

1 Introduction

We utilize a 5V passive buzzer. To drive this buzzer an oscillating source is needed. Pin V is power, Pin G is grounded and Pin S is PMW signal input. Pin S is connected to a triode to turn on/off the buzzer. A PWM signal can be either 3.3V or 5V and the buzzer's sound will vary accordingly.

2 Features

5V Power Supply

3.3V/5V PWM

Tiny, easy to be used in various situations

2.54mm spacing pin

3 How To

Connect to Tiny4412 SDK (1506) Firstly you need to remove the jumper on BP1_EN on the Tiny4412 SDK 1506 carrier board

Please connect Pin S to GPIO PIN1, V to 5V and G grounded

Connect to NanoPi TODO

Code Sample in C Under Linux

#include <stdio.h> #include <unistd.h> #include <stdlib.h> #include "libfahw.h" int parseCmd ( int argc, char ** argv, int * pin, int * Hz, int * duty ) { int num = atoi ( argv [ 1 ] ); int hz = atoi ( argv [ 2 ] ); int dt = atoi ( argv [ 3 ] ); if ( hz < 0 ) { return - 1; } if ( dt < 0 || dt > 1000 ) { return - 1; } switch ( num ) { case 0: * pin = TINY4412_PWM0; break; case 1: * pin = TINY4412_PWM1; break; default: printf ( "Unsupported pin TINY4412_PWM%d ", num ); num = 0; * pin = TINY4412_PWM0; } * Hz = hz; * duty = dt; printf ( "Using config: pin=PWM%d freq=%dHz duty=%d ", num, hz, dt ); return 0; } int main ( int argc, char ** argv ) { int pin = TINY4412_PWM0; int Hz; int duty; if ( argc == 4 ) { if ( parseCmd ( argc, argv, & pin, & Hz, & duty ) == - 1 ) { return - 1; } } else { Hz = 1000; duty = 500; printf ( "Usage:%s PWM[0~1] freq duty[0~1000] ", argv [ 0 ] ); printf ( "Using default config: pin=PWM0 freq=%dHz duty=%d ", Hz, duty ); } if ( PWMPlay ( pin, Hz, duty ) == - 1 ) { printf ( "Fail to output PWM " ); } printf ( "Press enter to stop PWM " ); getchar ( ); PWMStop ( pin ); printf ( "Stopped PWM " ); return 0; } Compile and Run

git clone http: // github.com / friendlyarm / fa-hardware.git cd fa-hardware cd demo cd matrix-buzzer make Copy your compiled bin to your board and you are ready to go.

Resources

Write a review

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad

Good

Enter the code in the box below

Continue

Copyright © 2008-2026 friendlyelec.com All rights reserved.

Top

Categories

CPU Module (11)

Mini Board (3)

NanoPC & NanoPi (31)

Hats & Docks (12)

Enclosure & Holder (17)

BakeBit Sensors/Modules (2)

Matrix Accessories (71)

LCD Module (17)

Value Pack & Kit (11)

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote