M4B – Rockchip RK3399 single-board development board with Gigabit Ethernet and Wi-Fi 5

Rockchip RK3399 single-board development board with Gigabit Ethernet and Wi-Fi 5

Maker, Prototyping, Open-Hardware & Developer Boards

  • Dual-Channel 2GB DDR3
  • microSD Slot x 1
  • 8 Layer, 85 mm x 56 mm
  • M4B
Manufacturer part number
M4B
Manufacturer
FriendlyElec
DDR3 RAM:
Dual-Channel 2GB DDR3
Memory
RAM: Dual-Channel 2GB DDR3

The FriendlyElec NanoPi M4B is a single-board development board based on the Rockchip RK3399 big.LITTLE SoC, intended for prototypes and embedded projects.

Product overview

Overview. The FriendlyElec NanoPi M4B single-board development board, reference M4B, is a development board built around the Rockchip RK3399 SoC with 2GB of dual-channel DDR3 memory.

Main characteristics. The processor combines two Cortex-A72 cores clocked up to 2.0GHz and four Cortex-A53 cores up to 1.5GHz. The Mali-T864 GPU supports OpenGL ES 1.1/2.0/3.0/3.1, OpenVG 1.1, OpenCL, DX11 and AFBC, and the VPU decodes 4K VP9 and 4K 10-bit H265/H264 at 60fps. Linux kernel versions 4.4-LTS, 4.19, 5.15 and 6.1-LTS are available.

Interfaces and connectivity. The native Gigabit Ethernet port has a unique MAC address. The combined Wi-Fi and Bluetooth module supports 802.11a/b/g/n/ac and Bluetooth 5.0, with an IPX-I antenna connector. The board provides two USB 3.0 Type-A ports, two USB 2.0 Type-A ports, a USB Type-C port for power input only, and an HDMI 2.0a port supporting 4K at 60Hz with HDCP 1.4/2.2. One or two 4-lane MIPI-CSI inputs with dual ISP and one 4-lane MIPI-DSI output complete the video interfaces, along with a 3.5mm dual-channel headphone jack and a microphone input.

GPIO and expansion. The 40-pin GPIO header provides up to three 3V/1.8V I2C buses, one 3V UART, one 3V SPI, an SPDIF_TX output, up to 8 3V GPIOs and an 8-channel 1.8V I2S. The 24-pin header exposes PCIe x2, one PWM, PowerKey and IR_RX. A debug UART0 port at 1500000bps, a microSD slot up to 128GB and an RTC battery connector complete the equipment.

Power and environment. The board is powered by DC 5V/3A via the Type-C connector or the GPIO header. The RK808-D PMIC enables DVFS, software power-down and RTC wake-up. The operating temperature range is -20°C to 70°C, with a weight of 17.95g and dimensions of 235.12 x 156.40mm without antenna.

Operating systems and typical use. Supported systems include Android 8.1 and 10, Lubuntu 16.04, FriendlyCore 18.04 and 20.04, FriendlyDesktop 18.04, FriendlyWrt 21.02 and 23.05, and Debian 10 Desktop and Debian 11 Desktop Buildroot. This board suits prototyping of gateways, multimedia terminals and dual-camera systems. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Button: one PowerKey, one Recovery Key
  • DDR3 RAM:: Dual-Channel 2GB DDR3
  • Debug Serial Port/UART0:: one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
  • Dimension: 235.12x156.40mm(without antenna)
  • GPIO1: 40pin, 2.54mm pitch pin-header
  • GPIO2: 24pin, 2.54mm pitch pin-header

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote