NanoPi M4V2 – Rockchip RK3399 single-board development board 4GB

Rockchip RK3399 single-board development board 4GB

Maker, Prototyping, Open-Hardware & Developer Boards

  • 8 Layer, 85 mm x 56 mm
  • DC 5V/3A
  • NanoPi M4V2
Manufacturer part number
M4V2
Manufacturer
FriendlyElec
DDR4 RAM
Dual-Channel 4GB LPDDR4
Memory
RAM: Dual-Channel 4GB LPDDR4

The FriendlyElec NanoPi M4V2 is a single-board development board built around a Rockchip RK3399 processor and 4GB of LPDDR4 memory, intended for prototyping and embedded development.

Product overview

Overview. The FriendlyElec NanoPi M4V2 is a single-board development board, model NanoPi M4V2, designed for prototyping and embedded development under Linux and Android.

Main characteristics. The Rockchip RK3399 SoC combines two Cortex-A72 cores running up to 2.0 GHz with four Cortex-A53 cores running up to 1.5 GHz. The board carries 4GB of dual-channel LPDDR4, a Mali-T864 GPU and a VPU able to decode 4K VP9 and 4K 10-bit H265/H264 at 60 fps.

Interfaces and connectivity. The board provides a native Gigabit Ethernet port, an 802.11a/b/g/n/ac Wi-Fi module with Bluetooth 4.1 in 2x2 MIMO with dual IPX antenna interface, four USB 3.0 Type-A ports, a USB Type-C port supporting USB 2.0 OTG and power input, and a microSD slot for up to 128GB. An HDMI 2.0a output supports 4K@60Hz. Audio input comprises a 3.5mm dual-channel headphone jack and a microphone input, with audio output also available over HDMI.

Expansion connectors. The 40-pin GPIO1 header provides I2C, UART, SPI, SPDIF_TX, GPIOs and an 8-channel I2S interface. The 24-pin GPIO2 header provides two independent USB 2.0 Host ports, PCIe x2 and a PWM output. A 4-pin debug UART at 3 V level and 1500000 bps is also present. Two 4-lane MIPI-CSI inputs with dual ISP, up to 13 MPix/s, and one 4-lane MIPI-DSI output complete the set.

Power and environment. Power is supplied at DC 5V/3A. Power management relies on an RK808-D PMIC with DVFS, software power-down, RTC wake-up and system sleep mode. The operating temperature range is -20 °C to 70 °C.

Typical uses and integration. The board suits prototyping, gateway, multimedia or embedded vision projects, with Debian, FriendlyCore, FriendlyWrt, OpenMediaVault or Alpine Linux systems. The RTC connector accepts a backup battery for the real-time clock. Dimensions are 235.12 x 156.40 mm without antenna, for a weight of 17.95 g.

See all specifications

Highlights

  • DDR4 RAM: Dual-Channel 4GB LPDDR4
  • Debug Serial Port/UART0:: one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
  • Dimension: 235.12x156.40mm(without antenna)
  • Memory: RAM: Dual-Channel 4GB LPDDR4
  • Network: Native Gigabit Ethernet
  • PCB: 8 Layer, Thickness: 1.2mm

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote