Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

Mini2440 – ARM9 S3C2440 development board with 3.5-inch LCD

ARM9 S3C2440 development board with 3.5-inch LCD

Maker, Prototyping, Open-Hardware & Developer Boards

  • Ethernet
  • RS-485
Manufacturer part number
MINI2440
Manufacturer
FriendlyElec

The Mini2440 is a development board built around a Samsung S3C2440 ARM9 processor running at 400 MHz, with 64 MB RAM, 10/100M Ethernet and serial interfaces, intended for embedded prototyping.

Product overview

FriendlyElec Mini2440 development board. The Mini2440 is a FriendlyElec ARM9 board built around the Samsung S3C2440 ARM926T processor, with a maximum frequency of 533 MHz and an indicated operating frequency of 400 MHz. It is presented in this configuration with a 3.5-inch LCD and standard accessories. Main characteristics — The board provides 64 MB of RAM on a 32-bit bus, up to 1 GB of NAND flash, and 256 bytes of I2C EEPROM. It includes an SD-card socket and a real-time clock with CR1220 battery. Interfaces and connectivity — It offers an RJ-45 10/100M Ethernet connection (DM9000 controller), three serial port connectors including one DB9 RS-232 port, one USB-A host 1.1 port and one USB-B device 1.1 port. It also has a 3.5 mm stereo audio output, a condenser microphone audio input, a PWM buzzer, a 20-pin (2.0 mm) camera interface and a 41-pin LCD interface compatible with FriendlyARM displays and the VGA board. User inputs and outputs — Six push buttons and one A/D potentiometer are available, together with four LEDs. Expansion connectors include a 40-pin system bus, a 34-pin GPIO, a 10-pin buttons connector (2.0 mm) and a 10-pin JTAG debug connector (2.0 mm). Power and environment — The board is powered by a regulated 5 V supply through a DC plug of 1.35 mm inner and 3.5 mm outer diameter. Power consumption is 0.3 A for the board alone, 0.6 A with the 3.5-inch LCD and 1 A with a 7-inch LCD. Dimensions: 100 x 100 mm. Operating systems — Windows CE 5 and 6 and Linux are listed as supported. Integration — The serial, Ethernet and expansion connectors allow the board to be connected to prototyping peripherals and expansion boards. Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote