Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

NanoPi NEO4 – RK3399 single-board development computer with Wi-Fi and Bluetooth

RK3399 single-board development computer with Wi-Fi and Bluetooth

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
NEO4
Manufacturer
FriendlyElec

The FriendlyElec NanoPi NEO4 is a single-board development computer built on the Rockchip RK3399 processor with 1GB DDR3, intended for prototyping and embedded development.

Product overview

Overview. The FriendlyElec NanoPi NEO4 is a 60 x 45 mm single-board development computer based on the Rockchip RK3399 processor, with a 64-bit big.LITTLE architecture combining two Cortex-A72 cores at up to 2.0GHz and four Cortex-A53 cores at up to 1.5GHz.

Main characteristics. The board provides 1GB DDR3-1866 memory and a Mali-T864 GPU supporting OpenGL ES 1.1/2.0/3.0/3.1, OpenCL and DX11. It has no onboard eMMC but includes an eMMC socket, and a microSD slot for external storage up to 128GB.

Interfaces and connectivity. The board offers native Gbps Ethernet, an 802.11 b/g/n Wi-Fi and Bluetooth 4.0 combo module with an IPX antenna connector, an HDMI 2.0a output supporting 4K@60Hz with HDCP 1.4/2.2, one 4-lane MIPI-CSI video input up to 13MPix/s, one USB 3.0 Type-A port, a USB Type-C port with OTG and power input, and two USB 2.0 host ports. The 40-pin GPIO header provides I2C, UART and SPI buses, an SPDIF_TX output, an 8-channel 1.8V I2S bus, a PWM output, PCIe x2 and a debug UART at 1500000bps.

Power and environment. The board is powered by DC 5V/3A and has a working temperature range of -20℃ to 70℃. It carries a red power LED and a green GPIO-controlled LED.

Typical uses. Its GPIO, I2C, UART and USB interfaces make it suitable for prototyping embedded systems, 4K video processing and Linux development with FriendlyWrt, FriendlyCore, Debian or Alpine Linux.

Integration. The board ships with a Linux 4.4 LTS kernel and U-Boot 2014.10 and can be completed with manufacturer accessories, including a heat sink and a 13.2MP MIPI camera module. The product is available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote