THM-01 – Temperature and humidity sensor module with DHT11 single bus

Temperature and humidity sensor module with DHT11 single bus

Temperature Sensor Modules

  • THM-01
Manufacturer part number
THM-01
Manufacturer
FriendlyElec
Product Code
THM-01

FriendlyElec THM-01 temperature and humidity sensor module based on the DHT11, with single bus communication over one data line, for ambient measurement.

Product overview

Overview. The FriendlyElec THM-01 is a temperature and humidity sensor module built around the DHT11 sensor. It measures ambient relative humidity and temperature and transmits the readings over a single bus requiring only one data line.

Main characteristics. The humidity range is 20 to 80 %RH with an accuracy of ±5 %RH, and the temperature range is 0 to 50 ℃ with an accuracy of ±2 ℃. The data format consists of 8-bit humidity integer and decimal data, 8-bit temperature integer and fractional data, and an 8-bit parity bit.

Interfaces and connectivity. Single bus (I/O) communication on one data pin, with 2.54 mm pitch pins. The module is powered at 5 V and has three pins (GND, VCC, S), simplified from the DHT11's four pins. Signal transmission over distances of up to 20 meters is stated.

Power and environment. 5 V supply on the VCC and GND pins.

Typical uses. Monitoring of ambient temperature and humidity in embedded projects, or with a Tiny4412 development board as shown in the integration example.

Integration. The data pin must be connected to a GPIO pin that can serve as an interrupt pin. The manufacturer provides a C code example under Linux, using the libfahw.h library to initialise the sensor and read humidity and temperature.

See all specifications

Highlights

  • Humidity accuracy: ±5%RH, temperature accuracy: ±2℃
  • Humidity range: 20-80%RH, temperature range: 0~50℃
  • Product Code: THM-01

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote