Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

ODROID-H4 – ODROID-H4 enclosure for 4 SATA 2.5-inch drives

ODROID-H4 enclosure for 4 SATA 2.5-inch drives

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
G230913102483
Manufacturer
Hardkernel

Hardkernel Case Type 3 enclosure for the ODROID-H4 board, holding up to four 2.5-inch SATA drives of 15 mm or 9.5 mm depending on the configuration.

Product overview

Overview. The Hardkernel ODROID-H4 Case Type 3 is an enclosure for the ODROID-H4 board, compatible with the ODROID-H4 PLUS and ODROID-H4 ULTRA, reference G230913102483.

Main characteristics. Dimensions of 150 mm x 132 mm x 127 mm (height). Three storage configurations are possible: two 15 mm 2.5-inch SATA drives, one 15 mm drive with two 9.5 mm drives, or four 9.5 mm drives. Units shipped from May 2025 accommodate four 15 mm thick drives, the height of the case having been increased by 20 mm with four additional spacers.

Connectivity and cooling. The case provides a user-configurable opening for the second Ethernet port of the H4+ and H4 Ultra boards, to be separated from the rear panel with a cutter. A thin 92 x 92 x 15 mm cooling fan can be installed internally as an option.

Fixing and assembly. The kit includes a 2.5-inch SATA HDD/SSD bracket, PCB supports of several lengths and bolts. The case is not compatible with the H2/H3 series. The cooling fan and network card are not included; an electric screwdriver is recommended for fitting the fan, and SATA data and power cables of 200 mm are recommended.

Typical use. This enclosure suits an ODROID-H4 board with several SATA storage drives in a compact format. Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote