HX-CH6017A – Compact multi-band helix GNSS antenna

Compact multi-band helix GNSS antenna

Combination Multi-Band Antennas

  • -40℃ to +70℃
  • 55mA(maximum)
  • ¢ 23.8*46.8mm
  • ≤ 3dB
Manufacturer part number
CH6017A
Manufacturer
Harxon
Operating Temperature
-40℃ to +70℃
Operation Current
55mA(maximum)

Compact 7 g helix GNSS antenna for high-precision RTK positioning, notably on surveying drones, power line inspection drones and GIS data collection.

Product overview

Overview. The Harxon HX-CH6017A is an embedded helix GNSS antenna designed for high-precision RTK positioning on drones and other positioning systems. It receives GPS L1/L2, GLONASS L1/L2, Galileo E1, BDS B1 and B2, QZSS L1/L2 and SBAS L1 signals.

Technology and stability. Harxon's patented D-QHA technology provides wide-angle circular polarization (WACP) and low phase center variation (PCV), for stable reception and improved positioning accuracy.

Main characteristics. Gain at zenith of 2 dBi maximum on 1217-1257 MHz and 2.5 dBi maximum on 1559-1610 MHz, axial ratio of 3 dB or less, noise figure of 1.5 dB or less and LNA gain of 33 dB typical. Group delay ripple is below 15 ns. The antenna weighs 7 g maximum and measures 23.8 × 46.8 mm.

Interfaces and connectivity. IPEX connector, nominal impedance of 50 Ω and output VSWR of 2.0 or less. Power supply from +3.3 V to +5 V DC with a maximum current of 55 mA.

Power and environment. Operating temperature from -40 °C to +70 °C, storage temperature from -40 °C to +70 °C, humidity up to 95 % non-condensing.

Typical uses. Drone surveying and mapping, GIS data collection, power line inspection and other drones requiring high-precision positioning. Mounting is defined by the customer.

Integration. The IPEX connector and low weight ease integration into a drone payload. As mounting is the customer's responsibility, the design must suit the enclosure and ground plane.

See all specifications

Highlights

  • Connector: IPEX
  • Group Delay Ripple: <15ns
  • Humidity: 95% non-condensing
  • LNA Gain: 33dB(typical)
  • Mounting: customers design own installation
  • Nominal Impedance: 50&Omega

Good to know before integrating

  • Thermal: rated operating range -40℃ to +70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote