HX-CH6601A – Dual-band helix GNSS antenna, multi-constellation

Dual-band helix GNSS antenna, multi-constellation

Combination Multi-Band Antennas

  • -40℃ to +70℃
  • 55mA(maximum)
  • ¢ 27.5*59mm
  • ≤ 3dB
Manufacturer part number
CH6601A
Manufacturer
Harxon
Operating Temperature
-40℃ to +70℃
Operation Current
55mA(maximum)

Compact, lightweight helix GNSS antenna receiving GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS signals, intended mainly for positioning and mapping drones.

Product overview

Overview. The Harxon HX-CH6601A is a dual-band helix GNSS antenna, a combination multi-band antenna designed to receive satellite navigation signals. It receives GPS L1/L2, GLONASS L1/L2, Galileo E1, BDS B1/B2, QZSS L1/L2 and SBAS L1 signals, with RHCP polarization.

Main characteristics. It integrates a low-noise amplifier (LNA) with a typical gain of 33 dB and a noise figure of less than or equal to 1.5 dB. Its axial ratio is less than or equal to 3 dB and its output VSWR less than or equal to 2.0, for a nominal impedance of 50 Ω.

Interfaces and connectivity. Connection is made through an SMA male connector. The power supply accepts +3.3 to +12 VDC, with a maximum operating current of 55 mA.

Dimensions and environment. Dimensions are Φ27.5 × 59 mm for a weight of less than or equal to 25 g. The housing is rated IP67 against water and dust. Operating and storage temperatures range from -40 °C to +70 °C, with 95% humidity non-condensing.

Typical uses. Its small footprint and low weight make it suitable for integration on surveying and mapping drones, power line inspection drones and agricultural drones, as well as GNSS handheld receivers.

Compliance. The antenna complies with CE, RoHS and REACH regulations.

See all specifications

Highlights

  • Connector: SMA male
  • Group Delay Ripple: <15n
  • Humidity: 95% non-condensing
  • LNA Gain: 33dB(typical)
  • Mounting: customers design own installation)
  • Nominal Impedance: 50&Omega

Good to know before integrating

  • Thermal: rated operating range -40℃ to +70℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote