HX-CSX078A – Multi-band high precision GNSS antenna with stacked patch design

Multi-band high precision GNSS antenna with stacked patch design

Combination Multi-Band Antennas

  • -40℃ to +85℃
  • ≤ 45mA
  • -55℃ to +85℃
  • ¢ 111x24.5mm
Manufacturer part number
CSX078A
Manufacturer
Harxon
Operating Temperature
-40℃ to +85℃
Operation Current
≤ 45mA

Harxon HX-CSX078A high precision GNSS antenna with stacked patch design, intended for survey stations and RTK applications, with multi-constellation and multi-band reception.

Product overview

Harxon HX-CSX078A GNSS antenna. The Harxon HX-CSX078A GNSS antenna is a precision tuned, stacked patch antenna designed to provide reliable and consistent positioning across its full bandwidth. It is intended for surveying and RTK positioning applications. Note: the manufacturer lists this product as discontinued.

Multi-constellation reception. The antenna receives GPS L1/L2/L5, GLONASS L1/L2/L3, GALILEO E1/E5a/E5b/E6, BDS B1/B2/B3, QZSS L1/L2/L5/L6, IRNSS L5, SBAS L1/L5 and L-Band signals. Its polarization is RHCP, with 360° omni-directional azimuth coverage.

RF performance. Peak gain is 5.5 dBi, LNA gain is 40±2 dB and noise figure is at most 2 dB. Nominal impedance is 50 Ω, output VSWR at most 2.0 and axial ratio at most 3 dB. Group delay ripple is at most 5 ns and passband ripple ±2 dB.

Power and connector. The antenna operates from +3.3 to +12 VDC, with an operation current of at most 45 mA. The connector is an MCX-C-JW1.5.

Environment and dimensions. The antenna operates between -40 °C and +85 °C, stores between -55 °C and +85 °C, and withstands 95 % humidity non-condensing. Its dimensions are 111 x 24.5 mm and its weight is at most 220 g.

Typical uses. Mobile (rover) and base survey stations, agriculture and robotics, according to the applications indicated by the manufacturer.

See all specifications

Highlights

  • Azimuth Coverage: 360°(omni-directional)
  • Connector: MCX-C-JW1.5
  • Humidity: 95% non-condensing
  • LNA Gain: 40±2 dB
  • Nominal Impedance: 50&Omega
  • Operating Temperature: -40℃ to +85℃

Good to know before integrating

  • Thermal: rated operating range -40℃ to +85℃ — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote