SE402A
Combination multi-band GNSS antenna with 868 MHz radio

- Operating Temperature
- -40℃ to +85℃
- Operation Current
- ≤ 45mA
- Storage Temperature
- -55℃ to +85℃
- Dimensions
- Φ 122*23.8mm
Combination multi-band GNSS antenna with 868 MHz radio
Combination Multi-Band Antennas
Harxon HX-SE402A combination GNSS antenna integrating an 868 MHz radio antenna, designed for RTK survey systems and robotic lawn mowers.
Overview. The Harxon HX-SE402A is a full-band GNSS combination antenna that integrates a GNSS antenna and an 868 MHz radio antenna in a single product. It receives GPS L1/L2/L5, GLONASS L1/L2/L3, GALILEO E1/E5a/E5b/E6, BDS B1I/B2I/B3I/B1C/B2a/B2b, QZSS L1/L2/L5/L6, IRNSS L5 and SBAS L1/L5 signals, as well as the 858-878 MHz band.
Main characteristics. Peak gain is 5 dBi for the GNSS section and 0.5 dBi for the 868 MHz section. The GNSS antenna is RHCP polarized, the radio antenna VP polarized. Phase center error is ±2 mm, axial ratio is 3 dB or less, with 360° azimuth coverage.
Amplification and electrical data. The low-noise amplifier provides 40±2 dB gain at L1 and 38±2 dB at L2, with a noise figure of 2 dB or less. Nominal impedance is 50 Ω and output VSWR is 2.0 or less. Current consumption is 45 mA or less, with a supply of +3.3 to +12 VDC.
Connectors. The GNSS section uses an MMCX-C-JW1.5 connector and the radio section an IPEX Ⅰ male connector.
Dimensions and environment. The diameter is 122 mm for a height of 23.8 mm. Operating temperature ranges from -40 °C to +85 °C and storage temperature from -55 °C to +85 °C.
Typical uses. This antenna suits survey rover and base stations, agricultural applications and robotics, including robotic lawn mowers, where its compact structure and good electromagnetic compatibility ease integration.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for SE402A, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | Φ 122*23.8mm |
| Axial Ratio | ≤ 3dB |
| Azimuth Coverage | 360° |
| Connector | GNSS: MMCX-C-JW1.5; 868M: IPEX Ⅰ Male |
| LNA Gain | L1: 40±2dB; L2: 38±2dB |
| Noise Figure | ≤ 2dB |
| Nominal Impedance | 50&Omega |
| Operating Temperature | -40℃ to +85℃ |
| Operation Current | ≤ 45mA |
| Operation Voltage | +3.3 to +12VDC |
| Output VSWR | ≤ 2.0 |
| Passband Ripple | ±2dB |
| Peak Gain | GNSS: 5dBi; 868M: 0.5dBi |
| Phase Center Error | ±2mm |
| Polarization | GNSS Antenna: RHCP; Radio Antenna: VP |
| Signal Received | GPS L1/L2/L5; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; BDS B1I/B2I/B3I/B1C/B2a/B2b; QZSS L1/L2/L5/L6; IRNSS L5; SBAS L1/L5; 858-878MHz |
| Storage Temperature | -55℃ to +85℃ |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for SE402A. For a missing document or a specific revision, our experts send it to you.
Harxon HX-SE402A combination GNSS antenna integrating an 868 MHz radio antenna, designed for RTK survey systems and robotic lawn mowers.
| Parameter | Value |
|---|---|
| Dimensions | Φ 122*23.8mm |
| Axial Ratio | ≤ 3dB |
| Azimuth Coverage | 360° |
| Connector | GNSS: MMCX-C-JW1.5; 868M: IPEX Ⅰ Male |
| LNA Gain | L1: 40±2dB; L2: 38±2dB |
| Noise Figure | ≤ 2dB |
| Nominal Impedance | 50&Omega |
| Operating Temperature | -40℃ to +85℃ |
| Operation Current | ≤ 45mA |
| Operation Voltage | +3.3 to +12VDC |
| Output VSWR | ≤ 2.0 |
| Passband Ripple | ±2dB |
| Peak Gain | GNSS: 5dBi; 868M: 0.5dBi |
| Phase Center Error | ±2mm |
| Polarization | GNSS Antenna: RHCP; Radio Antenna: VP |
| Signal Received | GPS L1/L2/L5; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; BDS B1I/B2I/B3I/B1C/B2a/B2b; QZSS L1/L2/L5/L6; IRNSS L5; SBAS L1/L5; 858-878MHz |
| Storage Temperature | -55℃ to +85℃ |
Points to check before using SE402A in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operation Current | ≤ 45mA |
| Operation Voltage | +3.3 to +12VDC |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of SE402A can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Connector": GNSS: MMCX-C-JW1.5; 868M: IPEX Ⅰ Male.
-40℃ to +85℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Combination multi-band GNSS antenna with 868 MHz radio

Gnss antenna hx

Gnss antenna hx full band

Gnss antenna hx

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | SE402A |
| Manufacturer | Harxon |
Combination Multi-Band Antennas
Dual-band L1/L5 multi-GNSS antenna for time synchronisation · Ref. : AU-500/AU-300
Price on request
Combination Multi-Band Antennas
Wide-band SDR kit with GPS antenna for BeagleBone · Ref. : 110060490
Price on request
Combination Multi-Band Antennas
Multi-band GNSS repeater antenna with RHCP polarization · Ref. : GNSS-ANTENNA-HX-CR8602A
Price on request
Combination Multi-Band Antennas
Multi-frequency quadrifilar RTK GNSS antenna · Ref. : BD-900
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details