VR402A
Full-band GNSS vehicle antenna, high precision

- Operating Temperature
- -40℃ to +85℃
- Operation Current
- ≤ 45mA
- Storage Temperature
- -55℃ to +85℃
- Dimensions
- Φ 69×23.5mm
Full-band GNSS vehicle antenna, high precision
Combination Multi-Band Antennas
High precision multi-constellation GNSS vehicle antenna with M18 screw mount and TNC-K connector, designed for accurate positioning in demanding environments.
The Harxon HX-VR402A is a high precision full-band GNSS vehicle antenna covering GPS, GLONASS, Galileo, BDS, QZSS, IRNSS, SBAS and L-Band — Overview — High phase center stability thanks to a multi-point feeding design, for consistent high precision GNSS positioning.
Performance. Peak gain of 4.0 dBi, LNA gain of 37 ± 2 dB, noise figure of 2 dB or less, 360° azimuth coverage, RHCP polarization and axial ratio of 3 dB or less. Passband ripple of ± 2 dB.
Connector and mounting. TNC-K connector, M18 screw mount, nominal impedance of 50 Ω and output VSWR of 2.0 or less.
Power and environment. Supply voltage of +3.3 to +12 VDC, operating current of 45 mA or less, operating temperature from -40 °C to +85 °C, storage from -55 °C to +85 °C and 95% humidity non-condensing.
Mechanical. Dimensions Φ69 × 23.5 mm, weight of 260 g or less, IP69K-rated housing.
Typical uses. Commercial and passenger vehicles, robots, precision agriculture, autonomous vehicles and drones, including in partially obstructed areas.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for VR402A, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Dimensions | Φ 69×23.5mm |
| Axial Ratio | ≤ 3dB |
| Azimuth Coverage | 360° |
| Connector | TNC-K |
| Humidity | 95% Non-condensing |
| LNA Gain | 37±2dB |
| Mounting | M18 Screws Mount |
| Noise Figure | ≤ 2dB |
| Nominal Impedance | 50&Omega |
| Operating Temperature | -40℃ to +85℃ |
| Operation Current | ≤ 45mA |
| Operation Voltage | +3.3 to +12VDC |
| Output VSWR | ≤ 2.0 |
| Passband Ripple | ±2dB |
| Peak Gain | 4.0dBi |
| Polarization | RHCP |
| Signal Received | GPS L1/L2/L5; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; BDS B1I/B2I/B3I/B1C/B2a/B2b; QZSS L1/L2/L5/L6; IRNSS L5; SBAS L1/L5; L-Band |
| Storage Temperature | -55℃ to +85℃ |
| VSWR | ≤ 2.0 |
| Weight | ≤ 260g |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for VR402A. For a missing document or a specific revision, our experts send it to you.
High precision multi-constellation GNSS vehicle antenna with M18 screw mount and TNC-K connector, designed for accurate positioning in demanding environments.
| Parameter | Value |
|---|---|
| Dimensions | Φ 69×23.5mm |
| Axial Ratio | ≤ 3dB |
| Azimuth Coverage | 360° |
| Connector | TNC-K |
| Humidity | 95% Non-condensing |
| LNA Gain | 37±2dB |
| Mounting | M18 Screws Mount |
| Noise Figure | ≤ 2dB |
| Nominal Impedance | 50&Omega |
| Operating Temperature | -40℃ to +85℃ |
| Operation Current | ≤ 45mA |
| Operation Voltage | +3.3 to +12VDC |
| Output VSWR | ≤ 2.0 |
| Passband Ripple | ±2dB |
| Peak Gain | 4.0dBi |
| Polarization | RHCP |
| Signal Received | GPS L1/L2/L5; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; BDS B1I/B2I/B3I/B1C/B2a/B2b; QZSS L1/L2/L5/L6; IRNSS L5; SBAS L1/L5; L-Band |
| Storage Temperature | -55℃ to +85℃ |
| VSWR | ≤ 2.0 |
| Weight | ≤ 260g |
Points to check before using VR402A in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
| Operation Current | ≤ 45mA |
| Operation Voltage | +3.3 to +12VDC |
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Answers to the questions that the recorded characteristics of VR402A can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Signal Received": GPS L1/L2/L5; GLONASS L1/L2/L3; GALILEO E1/E5a/E5b/E6; BDS B1I/B2I/B3I/B1C/B2a/B2b; QZSS L1/L2/L5/L6; IRNSS L5; SBAS L1/L5; L-Band.
-40℃ to +85℃ (source: Operating Temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Full-band GNSS vehicle antenna, high precision

Gnss antenna hx

Gnss antenna hx

Gnss antenna hx full band

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | VR402A |
| Manufacturer | Harxon |
Combination Multi-Band Antennas
Dual-band L1/L5 multi-GNSS antenna for time synchronisation · Ref. : AU-500/AU-300
Price on request
Combination Multi-Band Antennas
Wide-band SDR kit with GPS antenna for BeagleBone · Ref. : 110060490
Price on request
Combination Multi-Band Antennas
Multi-band GNSS repeater antenna with RHCP polarization · Ref. : GNSS-ANTENNA-HX-CR8602A
Price on request
Combination Multi-Band Antennas
Multi-frequency quadrifilar RTK GNSS antenna · Ref. : BD-900
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details