FN08-E2 – M8 cylindrical Hall sensor, contactless detection, NPN or PNP output

M8 cylindrical Hall sensor, contactless detection, NPN or PNP output

General Industrial Sensors & Transmitters

  • 3...20%
  • 10… 30 VDC
  • ≤ 15mA
  • ≤ 50mA
Manufacturer part number
FN08-E2
Manufacturer
Lanbao
Hysteresis range
3...20%
Supply voltage
10… 30 VDC

The Lanbao FN08-E2 is a magnetic Hall proximity sensor in an M8 cylindrical flush-mount housing. It detects contactlessly with a detection distance of 8 mm.

Product overview

Overview. The Lanbao FN08-E2 is an M8 cylindrical Hall sensor with three-wire DC operation, detecting contactlessly with a detection distance of 8 mm. It is offered in an NPN version (FN08DNC-E2) and a PNP version (FN08DPO-E2).

Main characteristics. Flush installation, stainless steel and nickel-copper alloy housing, switching frequency of 200 Hz, hysteresis of 3 to 20%, repetitive error of 3% or less, switch point offset of ±10% or less. A yellow LED indicates the output state.

Interfaces and connectivity. M12 connector, supply voltage of 10 to 30 VDC, consumption current of 15 mA or less, load current of 50 mA or less, residual voltage of 2.5 VDC or less. Surge and short-circuit protection.

Power and environment. Ambient temperature from -25 to 70 ℃, minimum operating temperature of -20 °C, humidity from 35 to 95 RH%, IP67 protection rating, vibration resistance of 1.5 mm complex amplitude from 10 to 50 Hz, withstand voltage of 1000 VAC for 60 s, insulation resistance of 50 MΩ or more at 500 VDC.

Typical uses. Position detection of mechanical parts, cylinders or moving parts fitted with a magnet in industrial automation machines, with an NPN or PNP output selected to suit the connected programmable logic controller.

Integration. The sensor suits industrial environments exposed to humidity and vibration thanks to its stainless steel housing and IP67 rating. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Ambient temperature: -25...70℃
  • Circuit protection: surge protection、 Short circuit protection,
  • Connection Type: M12 Connector
  • Detection Distance: 8mm
  • Dimension: M8*1*40
  • Environment Humidity: 35...95RH%

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10… 30 VDC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote