Lanbao FN12-E2 Hall effect sensor in M12 format, for detecting magnetic targets in flush installation, with NPN or PNP output.
Hysteresis range3...20%
Supply voltage10...30 VDC
Consumption Current≤ 15mA
Load Current≤ 200mA
Switching Frequency200Hz
Ambient temperature-25...70℃C
Product overview
Lanbao FN12-E2. The FN12-E2 is a Hall effect sensor from the Hall series of Shanghai Lanbao Sensor Technology, in M12 format with flush installation, for detecting magnetic targets.
Main characteristics. The detection distance of 12 mm depends on the magnetic strength of the target. The sensor offers a switching frequency of 200 Hz, a repetitive error of 3% or less and a switch point offset of +10% or less, with a hysteresis range of 3 to 20%. A yellow LED indicator shows the sensor status.
Connectivity and outputs. The connection is made through an M12 connector. The variants are FN12DNC-E2 with NPN output and FN12DPO-E2 with PNP output. The load current is up to 200 mA, the consumption current is 15 mA or less and the residual voltage is 2.5 VDC or less.
Power and environment. The supply voltage ranges from 10 to 30 VDC. Protection covers surge, short circuit, overload and reverse polarity. The ambient temperature range is -25 to 70 °C, the minimum operating temperature is -20 °C, the environment humidity is 35 to 95 RH% and the IP rating is IP67. The housing is made of nickel copper alloy. Insulation resistance is 50 MΩ or more at 500 VDC and withstand voltage is 1000 VAC 50/60 Hz for 60 s. The sensor resists vibration, with a complex amplitude of 1.5 mm at 10 to 50 Hz for 2 hours in each of the X, Y and Z directions.
Integration. This sensor suits position or presence detection of magnetic parts in PLCs and control systems, with NPN or PNP output depending on the wiring of the installation. Dimensions: M12 × 1 × 40.
Complex amplitude 1.5mm 10...50Hz(2 hours each in X, Y, and Z directions)
Withstand Voltage
1000/AC 50/60Hz 60s
Integration
Points to check before using FN12-E2 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Powerplan for a supply compatible with 10...30 VDC.
Power and communication
Supply voltage
10...30 VDC
Consumption Current
≤ 15mA
Load Current
≤ 200mA
Residual voltage
≤ 2.5VDC
Withstand Voltage
1000/AC 50/60Hz 60s
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Power : plan for a supply compatible with 10...30 VDC.
Applications and use cases
Architectures in which FN12-E2 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details