FN18-E2 – M18 cylindrical Hall effect magnet sensor, PNP and NPN

M18 cylindrical Hall effect magnet sensor, PNP and NPN

General Industrial Sensors & Transmitters

  • 3...20%
  • 10...30 VDC
  • ≤ 15mA
  • ≤ 200mA
Manufacturer part number
FN18-E2
Manufacturer
Lanbao
Hysteresis range
3...20%
Supply voltage
10...30 VDC

The FN18-E2 is a cylindrical M18 Hall effect sensor from Lanbao that detects the presence of a magnet. It is offered in NPN and PNP versions.

Product overview

Overview. The Lanbao FN18-E2 is an M18 Hall effect sensor designed to detect the presence of a magnet. Its detection distance depends on the magnetic strength of the target.

Main characteristics. Detection distance of 15 mm, switching frequency of 200 Hz, load current up to 200 mA and consumption current of 15 mA or less. It offers a hysteresis range of 3 to 20%, a repetitive error of 3% or less and a residual voltage of 2.5 VDC or less. It is flush mounted and has a yellow LED to check the sensor status.

Connection and outputs. M12 connector. Two versions are available: FN18DNC-E2 in NPN and FN18DPO-E2 in PNP.

Power and environment. Supply voltage of 10 to 30 VDC. Ambient operating temperature from -25 to 70 °C, with a minimum operating temperature of -20 °C. Ambient humidity of 35 to 95% RH. Protection rating IP67. Nickel copper alloy housing.

Protection and robustness. Protection against surge, short circuit, overload and reverse polarity. Vibration resistance of 1.5 mm complex amplitude between 10 and 50 Hz, for 2 hours in each of the X, Y and Z directions. Withstand voltage of 1000 VAC at 50/60 Hz for 60 s, insulation resistance of 50 MΩ or more at 500 VDC.

Use and integration. Suitable for position detection in industrial automation installations, with an M12 connection for simple integration into control systems.

See all specifications

Highlights

  • Supply voltage: 10...30 VDC
  • Ambient temperature: -25...70℃C
  • Connection Type: M12 Connector
  • Detection Distance: 15mm
  • Dimension: M18*1*40
  • Environment Humidity: 35...95RH%

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote