Wide-angle diffuse reflection photoelectric sensor with a 10 cm sensing range, for object presence detection in industrial automation. NPN or PNP output, NO or NC selectable.
Operating Temperature-25º C...55 º C
Detection range10cm
Supply voltage10...30 VDC
Consumption Current≤ 25mA
Load Current≤ 200mA
Storage Temperature-25º C … 70 º C
Product overview
Overview. The Lanbao PSE-BC10 is a wide-angle diffuse reflection photoelectric sensor in the compact PSE Little Square series. It detects objects at a 10 cm range using an 860 nm infrared light source.
Main characteristics. Response time of 0.5 ms or less, consumption current of 25 mA or less, load current of 200 mA or less, voltage drop of 1 V or less, hysteresis of 3 to 20%. Distance setting and NO/NC selection are made with a push button, with green and yellow indicator lights. The sensor is immune to ambient light, tolerating up to 10,000 lux of sunlight and 3,000 lux of incandescent light. Weight 10 g.
Connection and outputs. NPN or PNP output (PNP version reference PSE-BC10DPB), NO/NC configuration. Connection by 2 m PVC cable or M8 connector. Protected against short circuit, polarity reversal, overload and surges through Zener protection.
Environment. IP67 protection rating. Operating temperature -25 °C to 55 °C, storage temperature -25 °C to 70 °C. Housing in PC+ABS, filter in PMMA.
Typical uses and integration. Detection of object presence or passage on conveyor lines and automation equipment, connected directly to a PLC or discrete input module, supply 10 to 30 VDC. Compliant with EN 60947-5-2:2012 and IEC 60947-5-2:2012 standards, CE marked.
Short circuit protection,Polarity protection,Overload protection,Zener protection
Connection
2m PVC cable/M8 connector
Consumption Current
≤ 25mA
Detection range
10cm
Detection Type
Diffuse reflection (Wide-angle)
Distance adjustment
Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting.; If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum.
Hysteresis
3...20%
In conformity with standards
CE
Indicator
Green light: power, stable signal (unstable signal flash); Yellow light: output, overload or short circuit (flash)
Light source
Infrared(860nm)
Load Current
≤ 200mA
Material
Housing: PC+ABS;Filter: PMMA
NO/NC adjustment
Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch.
Operating Temperature
-25º C...55 º C
Output Type
NPN NO/NC or PNP NO/NC
PNP
PSE-BC10DPB
Production standard
EN60947-5-2:2012、IEC60947-5-2:2012
Protection degree
IP67
Storage Temperature
-25º C … 70 º C
Voltage drop
≤ 1V
Weight
10g
No specification matches.
Last verification : 2026-11-03
Technical documentation
Official documents and the technical data recorded for PSE-BC10. For a missing document or a specific revision, our experts send it to you.
Wide-angle diffuse reflection photoelectric sensor with a 10 cm sensing range, for object presence detection in industrial automation. NPN or PNP output, NO or NC selectable.
Short circuit protection,Polarity protection,Overload protection,Zener protection
Connection
2m PVC cable/M8 connector
Consumption Current
≤ 25mA
Detection range
10cm
Detection Type
Diffuse reflection (Wide-angle)
Distance adjustment
Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting.; If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum.
Hysteresis
3...20%
In conformity with standards
CE
Indicator
Green light: power, stable signal (unstable signal flash); Yellow light: output, overload or short circuit (flash)
Light source
Infrared(860nm)
Load Current
≤ 200mA
Material
Housing: PC+ABS;Filter: PMMA
NO/NC adjustment
Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch.
Operating Temperature
-25º C...55 º C
Output Type
NPN NO/NC or PNP NO/NC
PNP
PSE-BC10DPB
Production standard
EN60947-5-2:2012、IEC60947-5-2:2012
Protection degree
IP67
Storage Temperature
-25º C … 70 º C
Voltage drop
≤ 1V
Weight
10g
Integration
Points to check before using PSE-BC10 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Powerplan for a supply compatible with 10...30 VDC.
2Thermalrated operating range -25º C...55 º C — check it against the installation environment.
Power and communication
Supply voltage
10...30 VDC
Consumption Current
≤ 25mA
Load Current
≤ 200mA
Voltage drop
≤ 1V
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Power : plan for a supply compatible with 10...30 VDC.
Thermal : rated operating range -25º C...55 º C — check it against the installation environment.
Applications and use cases
Architectures in which PSE-BC10 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productLanbao
PSE-BC10
Diffuse reflection photoelectric sensor, 10 cm, infrared
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details