The Lanbao PSE-BC100 is an infrared diffuse reflection photoelectric sensor with a 100 cm detection range, selectable NPN or PNP NO/NC output and IP67 protection.
Operating Temperature-25º C...55 º C
Detection range100cm
Supply voltage10...30 VDC
Consumption Current≤ 25mA
Load Current≤ 200mA
Storage Temperature-25º C … 70 º C
Product overview
Overview. The Lanbao PSE-BC100 is a diffuse reflection photoelectric sensor of the PSE series with a detection range of 100 cm. It uses an 860 nm infrared light source and is suited to detecting the presence or position of objects without a reflector.
Main characteristics. Response time of 0.5 ms or less, distance adjustment by button, NO/NC adjustment by button, hysteresis of 3 to 20%, consumption current of 25 mA or less and load current of 200 mA or less, with a voltage drop of 1 V or less.
Outputs and connection. NPN NO/NC or PNP NO/NC outputs, with a 2 m PVC cable or M8 connector. Green indicator for power and stable signal, yellow indicator for output, overload or short circuit.
Power and environment. Supply voltage 10 to 30 VDC. Protection against short circuit, overload, reverse polarity and zener protection. Operating temperature -25 °C to 55 °C, storage temperature -25 °C to 70 °C, IP67 protection rating. PC+ABS housing, PMMA filter, weight 50 g.
Typical uses and integration. Object detection on conveyors and automation lines, connected to a PLC or control system depending on the selected output. Compliant with EN60947-5-2:2012 and IEC60947-5-2:2012, CE marked.
Short-circuit, overload, reverse polarity and zener protection
Connection
2m PVC cable/M8 connector
Consumption Current
≤ 25mA
Detection range
100cm
Detection Type
Diffuse reflection
Distance adjustment
Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting.; If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum.
Hysteresis
3… 20%
In conformity with standards
CE
Indicator
Green light: power, stable signal (unstable signal flash); Yellow light: output, overload or short circuit (flash)
Light source
Infrared(860nm)
Load Current
≤ 200mA
Material
Housing: PC+ABS;Filter: PMMA
NO/NC adjustment
Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch.
Operating Temperature
-25º C...55 º C
Output Type
NPN NO/NC or PNP NO/NC
PNP
PSE-BC100DPB
Production standard
EN60947-5-2:2012、IEC60947-5-2:2012
Protection degree
IP67
Storage Temperature
-25º C … 70 º C
Voltage drop
≤ 1V
Weight
50g
No specification matches.
Last verification : 2026-11-03
Technical documentation
Official documents and the technical data recorded for PSE-BC100. For a missing document or a specific revision, our experts send it to you.
The Lanbao PSE-BC100 is an infrared diffuse reflection photoelectric sensor with a 100 cm detection range, selectable NPN or PNP NO/NC output and IP67 protection.
Short-circuit, overload, reverse polarity and zener protection
Connection
2m PVC cable/M8 connector
Consumption Current
≤ 25mA
Detection range
100cm
Detection Type
Diffuse reflection
Distance adjustment
Press the button for 2...5s, when the yellow and green light flash synchronously at 4Hz, and lift to finish the distance setting.; If the yellow and green light flash asynchronously @8Hz for 3s, setting fails and the product distance goes to the maximum.
Hysteresis
3… 20%
In conformity with standards
CE
Indicator
Green light: power, stable signal (unstable signal flash); Yellow light: output, overload or short circuit (flash)
Light source
Infrared(860nm)
Load Current
≤ 200mA
Material
Housing: PC+ABS;Filter: PMMA
NO/NC adjustment
Press the button for 5...8s, when the yellow and green light flash synchronously at 2Hz, and lift. Finish state switch.
Operating Temperature
-25º C...55 º C
Output Type
NPN NO/NC or PNP NO/NC
PNP
PSE-BC100DPB
Production standard
EN60947-5-2:2012、IEC60947-5-2:2012
Protection degree
IP67
Storage Temperature
-25º C … 70 º C
Voltage drop
≤ 1V
Weight
50g
Integration
Points to check before using PSE-BC100 in a design. They are derived from the recorded characteristics, not from the manufacturer's application circuits.
1Powerplan for a supply compatible with 10...30 VDC.
2Thermalrated operating range -25º C...55 º C — check it against the installation environment.
Power and communication
Supply voltage
10...30 VDC
Consumption Current
≤ 25mA
Load Current
≤ 200mA
Voltage drop
≤ 1V
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Power : plan for a supply compatible with 10...30 VDC.
Thermal : rated operating range -25º C...55 º C — check it against the installation environment.
Applications and use cases
Architectures in which PSE-BC100 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productLanbao
PSE-BC100
Diffuse reflection infrared photoelectric sensor 100 cm
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details