PSE-PM10 – Polarized reflection laser photoelectric sensor 10 m

Polarized reflection laser photoelectric sensor 10 m

General Industrial Sensors & Transmitters

  • ≤ 20mA
  • ≤ 100mA
  • ≤ 1000Hz
  • CE
Manufacturer part number
PSE-PM10
Manufacturer
Lanbao
Supply voltage
10...30 VDC, Ripple<10%Vp-p
Consumption Current
&le; 20mA

Polarized reflection laser photoelectric sensor from the PSE Little Square series, 10 m rated distance, NPN or PNP NO+NC outputs, for object detection with a high-precision laser spot.

Product overview

Overview. The Lanbao PSE-PM10 is a polarized reflection photoelectric sensor from the PSE Little Square laser series, made by Shanghai Lanbao Sensor Technology. It detects objects at a rated distance of 10 m using a class 1 red laser at 650 nm.

Main characteristics. The main light spot measures 20 mm at 10 m, and the smallest detectable object is φ 3 mm from 0 to 2 m, then φ 6 mm from 2 to 10 m. The dead zone is below 20 cm, and the response time is 0.5 ms maximum for both turn-on and turn-off. The response frequency reaches 1000 Hz maximum. Distance is adjusted with a knob.

Outputs and connection. The sensor is available with NPN NO+NC or PNP NO+NC output, with a voltage drop of 1.5 V maximum and a load current of 100 mA maximum. It is fitted with an M8 4-pin connector or a 2 m PVC cable. A green LED shows power, and a yellow LED shows output, overload or short circuit.

Power supply and environment. The supply ranges from 10 to 30 VDC with ripple below 10% Vp-p, for a consumption of 20 mA maximum. Built-in protections cover short circuit, overload, reverse polarity and zener protection. The PC+ABS housing and PMMA optical elements give an IP67 protection rating. The operating temperature ranges from -10 to 50 °C and humidity from 35% to 85%, without icing or condensation. The sensor complies with EN60947-5-2:2012 and IEC60947-5-2:2012 and carries the CE marking.

Its PNP or NPN output connects to programmable logic controllers and standard digital inputs.

See all specifications

Highlights

  • Supply voltage: 10...30 VDC, Ripple<10%Vp-p
  • Humidity range: 35%~85%(no icing, no condensation)
  • Certification: CE
  • Connection: M8 4-pin connector/2m PVC cable
  • Dead Zone: <20cm
  • Detection method: Polarized reflection

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC, Ripple<10%Vp-p.
  • Thermal: rated operating range -10&ordm; C...50&ordm; C(no icing, no condensation) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote