PSE-PM5 – 5 m laser polarized reflection sensor, NPN/PNP output

5 m laser polarized reflection sensor, NPN/PNP output

General Industrial Sensors & Transmitters

  • ≤ 20mA
  • ≤ 100mA
  • ≤ 1000Hz
  • CE
Manufacturer part number
PSE-PM5
Manufacturer
Lanbao
Supply voltage
10...30 VDC, Ripple<10%Vp-p
Consumption Current
&le; 20mA

Polarized reflection laser photoelectric sensor with a 5 m rated range and NPN or PNP NO+NC output, for precise object detection with a 10 mm laser spot at 5 m.

Product overview

Overview. The Lanbao PSE-PM5 is a polarized reflection photoelectric laser sensor from the PSE Little Square series, with a rated range of 5 m and a laser spot for high positioning accuracy.

Main characteristics. Class 1 red laser source at 650 nm, main spot of 10 mm at 5 m, smallest detectable object of 3 mm or more from 0 to 2 m and 6 mm or more from 2 to 10 m, dead zone below 20 cm, response times T-on and T-off of 0.5 ms or less, response frequency of 1000 Hz or less, distance adjustment by knob.

Interfaces and outputs. NPN NO+NC or PNP NO+NC output depending on the version, load current of 100 mA or less, voltage drop of 1.5 V or less, M8 4-pin connector or 2 m PVC cable. Protection against short circuit, overload, reverse polarity and zener surge. Indicators: green power light, yellow output light, overload or short circuit (flickering).

Power and environment. Supply voltage 10 to 30 VDC, ripple below 10% Vp-p, consumption current of 20 mA or less. IP67 protection degree, operating temperature -10 °C to 50 °C, storage temperature -40 °C to 70 °C, humidity 35% to 85% with no icing or condensation. Housing in PC+ABS, optical elements in PMMA. Weight 10 g to 50 g depending on the version.

Typical uses and integration. Object detection on assembly or conveyor lines, including small parts thanks to the laser spot. Compliant with EN 60947-5-2:2012 and IEC 60947-5-2:2012, CE marked. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Supply voltage: 10...30 VDC, Ripple<10%Vp-p
  • Humidity range: 35%~85%(no icing, no condensation)
  • Certification: CE
  • Connection: M8 4-pin connector/2m PVC cable
  • Dead Zone: <20cm
  • Detection method: Polarized reflection

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 10...30 VDC, Ripple<10%Vp-p.
  • Thermal: rated operating range -10&ordm; C...50&ordm; C(no icing, no condensation) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote