Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

5-DSI-Touchscreen – 5-inch capacitive DSI touch display, IPS 800×480

5-inch capacitive DSI touch display, IPS 800×480

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
5-DSI-TOUCHSCREEN
Manufacturer
Luckfox

5-inch capacitive touch display with DSI interface for development boards, featuring an 800×480 IPS panel and up to 5 simultaneous touch points.

Product overview

Overview. The 5-DSI-Touchscreen from Luckfox is a 5-inch capacitive display with MIPI DSI interface, intended for prototyping projects and open-hardware boards.

Main characteristics. The IPS panel provides an 800×480 pixel resolution with a 178° viewing angle. The cover is toughened glass and the capacitive touch supports up to 5 touch points, depending on the operating system. The pixel pitch is 0.1363×0.1371 mm.

Interfaces and connectivity. The display connects through a single DSI cable, with a 15-pin FPC ribbon at 1.0 mm pitch. A 12 cm DSI cable and a second 160 mm FPC ribbon are supplied, together with a metal stand and a screw pack.

Compatibility. The product is supported by Raspberry Pi OS without additional driver. Raspberry Pi boards are not included.

Power and environment. Power consumption is low. The battery is not included.

Typical uses. This module suits touch input and display on a Raspberry Pi board for control, monitoring or prototyping interfaces.

Available on quotation from Atlas Electronics.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote