Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

3.5-RPi-LCD-CTP – 3.5inch Capacitive Touch Display for Raspberry Pi, IPS Panel, 320×480 Resolution, 5-point Touch, Toughened Glass Panel

3.5inch Capacitive Touch Display for Raspberry Pi, IPS Panel, 320×480 Resolution, Touch, Toughened Glass Panel

Maker, Prototyping, Open-Hardware & Developer Boards

Manufacturer part number
5-POINT
Manufacturer
Luckfox

3.5-inch IPS capacitive touch display for Raspberry Pi with 320×480 resolution and 5-point touch, intended for embedded interfaces and prototypes.

Product overview

Overview. The Luckfox 3.5-RPi-LCD-CTP is a 3.5-inch capacitive touch display with an IPS panel, designed to connect to a Raspberry Pi board. It shows 320×480 pixels, portrait by default, with 262K colours and a 170° viewing angle.

Main characteristics. 3.5-inch IPS panel, brightness of 200cd/㎡, refresh rate of 60Hz, pixel pitch of 0.153×0.153 mm and a toughened glass panel. The touch panel recognises up to 5 simultaneous points.

Interfaces and drivers. The display uses the ST7796S controller over a 4-wire SPI interface, while the GT911 touch controller communicates over I2C, which minimises the GPIO pins required. The module connects to the GPIO header and backlight adjustment is available.

Power. 5V supply, 3.3V logic level, battery not included.

Typical uses. Human-machine interface on Raspberry Pi, dashboard, prototyping of touch terminals, with drivers provided for Raspberry Pi OS.

Compatibility. Mechanically designed for Raspberry Pi 5, 4B and Zero 2 W according to the manufacturer's connection diagram.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote