K159-B – 4.7-inch e-paper development kit with ESP32-S3 and 3D-printed enclosure

4.7-inch e-paper development kit with ESP32-S3 and 3D-printed enclosure

Maker, Prototyping, Open-Hardware & Developer Boards

  • 0 ~ 40°C
  • 2x FPC 0.5mm-12P
  • microSD
  • 16MB
Manufacturer part number
K159-B
Manufacturer
M5Stack
Operating Temperature
0 ~ 40°C
Expansion Interface
2x FPC 0.5mm-12P

M5Stack K159-B development kit combining an ESP32-S3 board and a 4.7-inch e-paper display, factory-assembled with its 3D-printed enclosure, for information displays and electronics projects.

Product overview

Overview. The M5Stack K159-B, also called PaperDIY Complete Kit, is an e-paper development kit supplied with a main control board, an e-paper display and a 3D-printed enclosure, with hardware assembly completed at the factory. It suits desktop information displays, electronic labels and embedded hardware prototypes.

Main characteristics. The board uses an ESP32-S3-WROOM-1-N16R8 microcontroller (Xtensa 32-bit LX7 dual-core processor, up to 240 MHz) with 16 MB of Flash and 8 MB of Octal PSRAM. The 4.7-inch e-paper display offers a 960×540 resolution and 16-level grayscale display. The screen does not support touch.

Interfaces and connectivity. The kit provides 2.4 GHz Wi-Fi and includes a USB Type-C port, a microSD slot, two 0.5 mm FPC 12-pin expansion interfaces and three buttons: one power button (ON / OFF / RESET / BOOT) and two user buttons.

Power and environment. A built-in 140 mAh battery with SH1.0-2P connector runs on 3.7 V power, and the board can also be powered through USB Type-C (DC 5V) or the 5V pad. Power management is handled by an M5PM1 module. The operating temperature range is 0 to 40 °C.

Enclosure. The 3D-printed PLA enclosure is delivered pre-installed, and its model files are open source, allowing re-printing or custom modifications. Product dimensions: 120.0 × 68.2 × 6.3 mm; product weight: 43.1 g.

See all specifications

Highlights

  • Button: 1x Power Button (ON / OFF / RESET / BOOT) + 2x User Buttons
  • Enclosure Material: 3D-Printed (PLA)
  • ESP32-S3R8 core controller: 16MB Flash
  • Expansion Interface: 2x FPC 0.5mm-12P
  • Extended storage: microSD
  • Flash: 16MB

Good to know before integrating

  • Thermal: rated operating range 0 ~ 40°C — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote