M149 – SX1262 LoRa Module 868-923 MHz with SPI Interface

SX1262 LoRa Module 868-923 MHz with SPI Interface

Sub-GHz Modules

  • SPI
  • 868 ~ 923 MHz
  • 65.0 x 90.0 x 25.0mm
  • RP-SMA Female
Manufacturer part number
M149
Manufacturer
M5Stack
Communication interface
SPI
Operating Frequency Band
868 ~ 923 MHz

The M149 is a stackable long-range LoRa communication module from M5Stack, based on the SX1262 transceiver, intended for remote monitoring, smart home, industrial automation and IoT nodes.

Product overview

M5Stack M149 LoRa module. The M149 (Module13.2 LoRa-1262) from M5Stack is a stackable LoRa radio communication module integrating the Stamp LoRa-1262 module and the SX1262 RF transceiver, for communication in the 868 ~ 923 MHz band.

Radio characteristics. The module supports LoRa, FSK, GFSK, MSK, GMSK and OOK modulation modes. Maximum transmit power is approximately +22 dBm and receive sensitivity reaches -147 dBm in LoRa low-rate mode. An external 868 MHz antenna with 3dBi gain and 108 mm length connects to the female RP-SMA connector.

Interfaces and connectivity. Data is exchanged with the main controller over an SPI communication interface. The module integrates the M5IOE1 IO expansion chip, addressable over I2C at 0x71 to 0x74 via DIP switch. Onboard DIP switches also adapt the LoRa pins to the IO resources of different controllers and allow multiple modules to be stacked.

Power and environment. Power input is DC 9 to 24 V through a 5.5 x 2.1 mm connector (center positive), with a 1.25mm-2P battery holder. Receive consumption is 4.5 mA at 12 V and 174.52 mA at 4.2 V, and standby consumption is 79.4 uA at 4.2 V. The module weighs 23.5 g excluding antenna, in a 59.1 x 54.0 x 20.2 mm footprint.

Typical uses. Remote monitoring, smart home, industrial automation and IoT nodes, with the module connected to a controller via SPI and I2C.

Warning. Never transmit without an antenna connected, as this can cause permanent hardware damage. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Antenna Connector: RP-SMA Female
  • Battery Holder Specification: 1.25mm-2P
  • Communication interface: SPI
  • Gross weight: 38.3g
  • IO Expansion Chip I2C Address: 0x71 ~ 0x74, controlled by DIP switch
  • LoRa Module: Stamp LoRa-1262

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Sub-GHz Modules
Request a quote