U222
8-channel servo controller with STM32G031 microcontroller, I2C

- Communication interface
- I2C @ 0x25 ~ 0x34
- IO Channel Interface
- 8 x 2.54-3P
- Package Size
- 138.0 x 93.0 x 13.0mm
- Gross weight
- 17.2g
8-channel servo controller with STM32G031 microcontroller, I2C
Maker, Prototyping, Open-Hardware & Developer Boards
8-channel servo control unit driven over I2C, with 8 configurable IO channels and an integrated 5 V 3 A output, intended for prototyping and robotics.
M5Stack U222. 8-channel servo controller with I2C interface based on the STM32G031G8U6 microcontroller. The product is an 8-channel servo control unit with 8 configurable IO channels.
Main characteristics. Each channel can operate in servo control, digital input or output, ADC input, RGB LED or PWM mode. The module is addressed over an I2C interface at 0x25 to 0x34; the address is set with a 16-position rotary switch.
Interfaces and connectivity. The unit provides 8 x 2.54-3P connectors for the IO channels and 2 internal HY2.0-4P connectors on the same I2C bus, allowing other I2C devices to be chained. A Unit 8Servos2-Chain variant is also listed, with chain cascade.
Power and environment. The power input accepts DC 9 to 24 V (5.5 x 2.1 mm connector, centre positive polarity). An SY8303AIC converter provides a 5 V output up to 3 A shared by all onboard loads. An INA199A1DCKR current detection circuit, paired with a 10 mΩ sampling resistor, monitors the total servo current. Two indicators show the input voltage status (red) and undervoltage on the HY2.0-4P interfaces (green, below 4.5 V).
Typical uses. Control of multiple servomotors, robot joint drive, smart toys and STEAM education applications, where the module fits into an existing I2C system.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for U222, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Channel Count | Unit 8Servos2-I2C: 8; Unit 8Servos2-Chain: 8 |
| Communication interface | I2C @ 0x25 ~ 0x34 |
| Configurable IO Channels | 8, supports operating modes: servo control, digital input / output, ADC input, RGB LED, PWM mode |
| Core Chip | Unit 8Servos2-I2C: STM32G031G8U6; Unit 8Servos2-Chain: STM32G031G8U6 |
| Current Detection | Unit 8Servos2-I2C: INA199; Unit 8Servos2-Chain: INA199 |
| Current Detection Circuit | INA199A1DCKR, paired with a 10mΩ sampling resistor |
| DC Power Input Interface | Input voltage: DC 9 ~ 24V, spec: 5.5 x 2.1mm, polarity: center positive, outer negative |
| Green indicator | HY2.0-4P interface undervoltage status indicator (lights up when the interface voltage is lower than 4.5V) |
| Gross weight | 17.2g |
| Indicator | Red DC input monitoring indicator, green undervoltage monitoring indicator |
| IO Channel Interface | 8 x 2.54-3P |
| MCU | STM32G031G8U6 |
| Node Expansion | Unit 8Servos2-I2C: I2C address: 0x25 ~ 0x34; Unit 8Servos2-Chain: Chain cascade |
| Operating Modes | Unit 8Servos2-I2C: Digital input/output / Servo / ADC / RGB / PWM; Unit 8Servos2-Chain: Digital input/output / Servo / ADC / RGB / PWM |
| Package Size | 138.0 x 93.0 x 13.0mm |
| Power Input | Unit 8Servos2-I2C: DC 9 ~ 24V; Unit 8Servos2-Chain: DC 9 ~ 24V |
| Power Output | DC 5V, max 3A (shared by all onboard loads) |
| Product Size | 56.0 x 24.0 x 11.5mm |
| Product Weight | 11.6g |
| Servo Power Supply | Unit 8Servos2-I2C: DC 5V; Unit 8Servos2-Chain: DC 5V |
| Status indication Red indicator | DC power interface status indicator (lights up when the interface voltage is higher than 8.5V) |
| Step-Down Chip | SY8303AIC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for U222. For a missing document or a specific revision, our experts send it to you.
8-channel servo control unit driven over I2C, with 8 configurable IO channels and an integrated 5 V 3 A output, intended for prototyping and robotics.
| Parameter | Value |
|---|---|
| Channel Count | Unit 8Servos2-I2C: 8; Unit 8Servos2-Chain: 8 |
| Communication interface | I2C @ 0x25 ~ 0x34 |
| Configurable IO Channels | 8, supports operating modes: servo control, digital input / output, ADC input, RGB LED, PWM mode |
| Core Chip | Unit 8Servos2-I2C: STM32G031G8U6; Unit 8Servos2-Chain: STM32G031G8U6 |
| Current Detection | Unit 8Servos2-I2C: INA199; Unit 8Servos2-Chain: INA199 |
| Current Detection Circuit | INA199A1DCKR, paired with a 10mΩ sampling resistor |
| DC Power Input Interface | Input voltage: DC 9 ~ 24V, spec: 5.5 x 2.1mm, polarity: center positive, outer negative |
| Green indicator | HY2.0-4P interface undervoltage status indicator (lights up when the interface voltage is lower than 4.5V) |
| Gross weight | 17.2g |
| Indicator | Red DC input monitoring indicator, green undervoltage monitoring indicator |
| IO Channel Interface | 8 x 2.54-3P |
| MCU | STM32G031G8U6 |
| Node Expansion | Unit 8Servos2-I2C: I2C address: 0x25 ~ 0x34; Unit 8Servos2-Chain: Chain cascade |
| Operating Modes | Unit 8Servos2-I2C: Digital input/output / Servo / ADC / RGB / PWM; Unit 8Servos2-Chain: Digital input/output / Servo / ADC / RGB / PWM |
| Package Size | 138.0 x 93.0 x 13.0mm |
| Power Input | Unit 8Servos2-I2C: DC 9 ~ 24V; Unit 8Servos2-Chain: DC 9 ~ 24V |
| Power Output | DC 5V, max 3A (shared by all onboard loads) |
| Product Size | 56.0 x 24.0 x 11.5mm |
| Product Weight | 11.6g |
| Servo Power Supply | Unit 8Servos2-I2C: DC 5V; Unit 8Servos2-Chain: DC 5V |
| Status indication Red indicator | DC power interface status indicator (lights up when the interface voltage is higher than 8.5V) |
| Step-Down Chip | SY8303AIC |
Answers to the questions that the recorded characteristics of U222 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Channel Count": Unit 8Servos2-I2C: 8; Unit 8Servos2-Chain: 8.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
8-channel servo controller with STM32G031 microcontroller, I2C

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | U222 |
| Manufacturer | M5Stack |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details