U223
8-Channel Servo Controller with UART Chain Cascade

- IO Channel Interface
- 8 x 2.54-3P
- Package Size
- 138.0 x 93.0 x 14.0mm
- Gross weight
- 17.1g
- MCU
- STM32G031G8U6
8-Channel Servo Controller with UART Chain Cascade
Maker, Prototyping, Open-Hardware & Developer Boards
The M5Stack U223 is an 8-channel servo control unit built around an STM32G031G8U6 core, chainable over UART. It suits multi-servo control and robot joint drive.
Overview. The M5Stack U223 (Unit 8Servos2-Chain) is an 8-channel servo cascade control unit built around an STM32G031G8U6 core controller. It is intended for prototyping and multi-servo control.
IO channels. The unit provides eight configurable IO channels (8 x 2.54-3P interface), each operating in servo control, digital input/output, ADC input, RGB LED or PWM mode.
Communication and cascade. The unit uses the Chain series UART serial cascade communication protocol. Two HY2.0-4P interfaces (input and output) allow multiple devices to be chained. A 20 cm HY2.0-4P Grove cable is included.
Power and measurement. The input power is DC 9 to 24 V (5.5 x 2.1 mm connector, center positive polarity). An SY8303AIC step-down converter provides a 5 V output of up to 3 A, shared by all onboard loads. An INA199A1DCKR current detection circuit, paired with a 10 mΩ sampling resistor, measures the total servo current. Input voltage and 5 V supply voltage are also monitored.
Indicators. A red LED indicates DC power interface voltage above 8.5 V, and a green LED indicates undervoltage on the HY2.0-4P interface when the voltage is below 4.5 V.
Typical uses. Control of multiple servo motors, robot joint drive and smart toys, in educational and prototyping contexts.
Physical characteristics. Product dimensions 56.0 x 24.0 x 11.5 mm, product weight 11.7 g, package size 138.0 x 93.0 x 14.0 mm.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for U223, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Channel Count | Unit 8Servos2-I2C: 8; Unit 8Servos2-Chain: 8 |
| Communication interface | UART @ Chain Series Communication Protocol (IN / OUT) |
| Configurable IO Channels | 8, supports operating modes: servo control, digital input/output, ADC input, RGB LED, PWM mode |
| Core Chip | Unit 8Servos2-I2C: STM32G031G8U6; Unit 8Servos2-Chain: STM32G031G8U6 |
| Current Detection | Unit 8Servos2-I2C: INA199; Unit 8Servos2-Chain: INA199 |
| Current Detection Circuit | INA199A1DCKR, paired with a 10mΩ sampling resistor |
| DC Power Input Interface | Input voltage: DC 9 ~ 24V, spec: 5.5 x 2.1mm, polarity: center positive, outer negative |
| Green indicator | HY2.0-4P interface undervoltage status indicator (lights up when the interface voltage is lower than 4.5V) |
| Gross weight | 17.1g |
| Indicator | Red DC input monitoring indicator, green undervoltage monitoring indicator |
| IO Channel Interface | 8 x 2.54-3P |
| MCU | STM32G031G8U6 |
| Node Expansion | Unit 8Servos2-I2C: I2C address: 0x25 ~ 0x34; Unit 8Servos2-Chain: Chain cascade |
| Operating Modes | Unit 8Servos2-I2C: Digital input/output / Servo / ADC / RGB / PWM; Unit 8Servos2-Chain: Digital input/output / Servo / ADC / RGB / PWM |
| Package Size | 138.0 x 93.0 x 14.0mm |
| Power Input | Unit 8Servos2-I2C: DC 9 ~ 24V; Unit 8Servos2-Chain: DC 9 ~ 24V |
| Power Output | DC 5V, max 3A (shared by all onboard loads) |
| Product Size | 56.0 x 24.0 x 11.5mm |
| Product Weight | 11.7g |
| Servo Power Supply | Unit 8Servos2-I2C: DC 5V; Unit 8Servos2-Chain: DC 5V |
| Status indication Red indicator | DC power interface status indicator (lights up when the interface voltage is higher than 8.5V) |
| Step-Down Chip | SY8303AIC |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for U223. For a missing document or a specific revision, our experts send it to you.
The M5Stack U223 is an 8-channel servo control unit built around an STM32G031G8U6 core, chainable over UART. It suits multi-servo control and robot joint drive.
| Parameter | Value |
|---|---|
| Channel Count | Unit 8Servos2-I2C: 8; Unit 8Servos2-Chain: 8 |
| Communication interface | UART @ Chain Series Communication Protocol (IN / OUT) |
| Configurable IO Channels | 8, supports operating modes: servo control, digital input/output, ADC input, RGB LED, PWM mode |
| Core Chip | Unit 8Servos2-I2C: STM32G031G8U6; Unit 8Servos2-Chain: STM32G031G8U6 |
| Current Detection | Unit 8Servos2-I2C: INA199; Unit 8Servos2-Chain: INA199 |
| Current Detection Circuit | INA199A1DCKR, paired with a 10mΩ sampling resistor |
| DC Power Input Interface | Input voltage: DC 9 ~ 24V, spec: 5.5 x 2.1mm, polarity: center positive, outer negative |
| Green indicator | HY2.0-4P interface undervoltage status indicator (lights up when the interface voltage is lower than 4.5V) |
| Gross weight | 17.1g |
| Indicator | Red DC input monitoring indicator, green undervoltage monitoring indicator |
| IO Channel Interface | 8 x 2.54-3P |
| MCU | STM32G031G8U6 |
| Node Expansion | Unit 8Servos2-I2C: I2C address: 0x25 ~ 0x34; Unit 8Servos2-Chain: Chain cascade |
| Operating Modes | Unit 8Servos2-I2C: Digital input/output / Servo / ADC / RGB / PWM; Unit 8Servos2-Chain: Digital input/output / Servo / ADC / RGB / PWM |
| Package Size | 138.0 x 93.0 x 14.0mm |
| Power Input | Unit 8Servos2-I2C: DC 9 ~ 24V; Unit 8Servos2-Chain: DC 9 ~ 24V |
| Power Output | DC 5V, max 3A (shared by all onboard loads) |
| Product Size | 56.0 x 24.0 x 11.5mm |
| Product Weight | 11.7g |
| Servo Power Supply | Unit 8Servos2-I2C: DC 5V; Unit 8Servos2-Chain: DC 5V |
| Status indication Red indicator | DC power interface status indicator (lights up when the interface voltage is higher than 8.5V) |
| Step-Down Chip | SY8303AIC |
Answers to the questions that the recorded characteristics of U223 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Channel Count": Unit 8Servos2-I2C: 8; Unit 8Servos2-Chain: 8.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
8-Channel Servo Controller with UART Chain Cascade

Sensor Adapter for Click, QWIIC and Grove Modules

RS485 Module 3PEAK TP8485E

4-20mA Module STMicroelectronics LM2902

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | U223 |
| Manufacturer | M5Stack |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details