U228 – 6-DoF IMU Unit with BMI270 Inertial Sensor

6-DoF IMU Unit with BMI270 Inertial Sensor

Maker, Prototyping, Open-Hardware & Developer Boards

  • ±0.5 °/s
  • 138.0 x 93.0 x 7.0mm
  • 6.6g
  • 24.0 x 24.0 x 8.0mm
Manufacturer part number
U228
Manufacturer
M5Stack
Accelerometer Range
±2 g / ±4 g / ±8 g / ±16 g
Accelerometer Accuracy
±20 mg (approx. ±0.02 g)

M5Stack U228 six-axis inertial sensor unit combining a 16-bit accelerometer and gyroscope over I2C, for motion detection and attitude sensing.

Product overview

M5Stack U228. The U228 (Unit DoF6) is a six-axis inertial sensor unit from M5Stack built around the BMI270 IC, which integrates a 16-bit 3-axis accelerometer and a 16-bit 3-axis gyroscope.

Measurements. Acceleration, angular velocity and temperature are acquired in real time. The accelerometer offers ranges of ±2 g, ±4 g, ±8 g and ±16 g with an accuracy of approximately ±20 mg; the gyroscope offers ranges of ±125, ±250, ±500, ±1000 and ±2000 °/s with an accuracy of ±0.5 °/s.

Interface and connectivity. I2C communication, with address 0x68 or 0x69 selectable through an onboard switch. On-chip motion detection.

Dimensions and weight. Product size 24.0 x 24.0 x 8.0 mm, product weight 3.1 g.

Typical uses. Robot attitude sensing, motion detection, wearables, gimbal control and human-machine interaction, as listed by the manufacturer.

Integration. Supplied with a 5 cm HY2.0-4P Grove cable for direct connection to the I2C bus.

See all specifications

Highlights

  • Accelerometer: 16-bit 3-axis accelerometer
  • Accelerometer Accuracy: ±20 mg (approx. ±0.02 g)
  • Accelerometer Range: ±2 g / ±4 g / ±8 g / ±16 g
  • Communication interface: I2C @ 0x68 / 0x69 (switchable via onboard switch)
  • Gross weight: 6.6g
  • Gyroscope: 16-bit 3-axis gyroscope

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote