BMM350 – 3-Axis TMR Magnetometer Unit

3-Axis TMR Magnetometer Unit

Maker, Prototyping, Open-Hardware & Developer Boards

  • I2C @ 0x14
  • 167.02 μA (measured)
  • 6.42 μA (measured)
  • 138.0 x 93.0 x 7.0mm
Manufacturer part number
U231
Manufacturer
M5Stack
Communication interface
I2C @ 0x14
Continuous Read Current
167.02 μA (measured)

M5Stack three-axis magnetometer unit with BMM350 sensor, for measuring the magnetic field and providing heading after calibration.

Product overview

Overview. The M5Stack U231 is a three-axis magnetometer unit built around the BMM350 sensor, based on TMR (tunnel magnetoresistance) technology. It measures the magnetic field along the X, Y and Z axes and transmits its data over I2C.

Main characteristics. Magnetic field resolution of approx. 0.1 μT, typical measurement range of ±2000 μT on each axis, heading error below 10° after calibration. The sensor supports communication rates of 100 kHz and 400 kHz.

Interfaces and connectivity. I2C communication at address 0x14, HY2.0-4P Grove connector. The module ships with a 5 cm Grove cable.

Power and environment. Measured continuous read current of 167.02 μA and sleep current of 6.42 μA. Chip operating temperature range of -40 to 85 °C. Product dimensions 24.0 x 24.0 x 8.0 mm, weight 3.1 g.

Typical uses. Robot navigation, heading detection, electronic compass, motion tracking and magnetic field sensing.

See all specifications

Highlights

  • Communication interface: I2C @ 0x14
  • Communication Rate: 100 kHz / 400 kHz
  • Continuous Read Current: 167.02 μA (measured)
  • Gross weight: 6.6g
  • Heading Accuracy: Error < 10° after calibration
  • I2C Communication Rate: 100 kHz / 400 kHz

Good to know before integrating

  • Thermal: rated operating range -40 ~ 85°C (chip specification) — check it against the installation environment.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote