Dual-protocol radio module combining LoRaWAN and Bluetooth Low Energy 5.0 for OEM IoT products, for long-range battery-powered data transmission and configuration from a phone.
BLE-side Sleep Current<5 µA
LoRa-side Sleep Current<3 µA
Sleep current<5 µA
BLE Frequency Band2.4 GHz
Flash on BLE Processor192 kB
Flash on LoRa Processor256 kB
Product overview
Overview. The Macnman MAC32WBLE5 is a LoRaWAN and BLE 5.0 IoT module that combines two radios on one board: LoRa for long-range transmission to a gateway and Bluetooth Low Energy for local setup from a phone.
Main characteristics. The module delivers up to +22 dBm on LoRa and up to +4 dBm on BLE in the 2.4 GHz band. The LoRa processor has 256 kB of flash and 64 kB of RAM, the BLE processor 192 kB of flash. The 32-bit ARM Cortex-M33 core handles processing on the module.
Interfaces and connectivity. The module provides 32 I/O pins, a 12-bit analogue-to-digital converter and three buses: UART, SPI and I2C.
Power and environment. The operating voltage ranges from 1.8 V to 3.6 V. In sleep mode the LoRa side draws less than 3 µA and the BLE side less than 5 µA.
Typical uses. The module suits battery-powered IoT products that send their data over LoRaWAN and are configured, diagnosed or updated over BLE without cable or buttons.
Integration. The UART, SPI and I2C buses allow external sensors and microcontrollers to be connected to the module.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for LORA-BLE-MODULE-MAC32WBLE5, with where it comes from. Use the filters to find one quickly.
All specifications (15)
Characteristic
Value
Analog-to-digital converter
12-bit
BLE Frequency Band
2.4 GHz
BLE-side Sleep Current
<5 µA
BLE version
BLE 5.0
Buses
UART, SPI and I2C
Cortex-M33 Core
32-bit ARM
Flash on BLE Processor
192 kB
Flash on LoRa Processor
256 kB
I/O Pins on Module
32
LoRa-side Sleep Current
<3 µA
Maximum BLE Output Power
+4 dBm
Maximum LoRa Output Power
+22 dBm
Operating Voltage
1.8–3.6 V
RAM on LoRa Processor
64 kB
Sleep current
<5 µA
No specification matches.
Last verification : 2026-11-03
Technical documentation
Official documents and the technical data recorded for LORA-BLE-MODULE-MAC32WBLE5. For a missing document or a specific revision, our experts send it to you.
Dual-protocol radio module combining LoRaWAN and Bluetooth Low Energy 5.0 for OEM IoT products, for long-range battery-powered data transmission and configuration from a phone.
BLE-side Sleep Current<5 µA
LoRa-side Sleep Current<3 µA
Sleep current<5 µA
BLE Frequency Band2.4 GHz
Flash on BLE Processor192 kB
2. Datasheet extract (recorded values)
Parameter
Value
Analog-to-digital converter
12-bit
BLE Frequency Band
2.4 GHz
BLE-side Sleep Current
<5 µA
BLE version
BLE 5.0
Buses
UART, SPI and I2C
Cortex-M33 Core
32-bit ARM
Flash on BLE Processor
192 kB
Flash on LoRa Processor
256 kB
I/O Pins on Module
32
LoRa-side Sleep Current
<3 µA
Maximum BLE Output Power
+4 dBm
Maximum LoRa Output Power
+22 dBm
Operating Voltage
1.8–3.6 V
RAM on LoRa Processor
64 kB
Sleep current
<5 µA
Applications and use cases
Architectures in which LORA-BLE-MODULE-MAC32WBLE5 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for LORA-BLE-MODULE-MAC32WBLE5 and the other parts of your project.
Answers to the questions that the recorded characteristics of LORA-BLE-MODULE-MAC32WBLE5 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support I2C?
Yes — recorded under "Buses": UART, SPI and I2C.
2Does it support SPI?
Yes — recorded under "Buses": UART, SPI and I2C.
3Does it include Bluetooth?
Yes — recorded under "BLE Frequency Band": 2.4 GHz.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details