E32S3128GC
ESP32-S3 development board with 1.28-inch round touch display

- LCD interface
- SPI
- Mabee interface
- 1*I2C; 1*GPIO
- Arduino support
- Yes
- Button
- Flash button and reset button
ESP32-S3 development board with 1.28-inch round touch display
Maker, Prototyping, Open-Hardware & Developer Boards
Makerfabs ESP32-S3 development board combining a 1.28-inch 240x240 round touch TFT display with Wi-Fi and Bluetooth 5.0, intended for prototyping compact embedded interfaces such as a smartwatch.
Overview. The Makerfabs E32S3128GC is an ESP32-S3 development board with a 1.28-inch round touch TFT display at 240x240 resolution, designed for prototyping compact interfaces such as a smartwatch.
Main characteristics. The ESP32-S3 microcontroller is paired with 16MB of Flash and 8MB of PSRAM. The display is driven by the GC9A01 controller and the touch panel by the CST816S.
Interfaces and connectivity. The display is connected over SPI, which leaves GPIO pins free for other uses. The board provides Wi-Fi and Bluetooth 5.0, native USB, a microSD slot, and a Mabee interface with one I2C bus and one GPIO. Flash and reset buttons are fitted on the board.
Power and environment. The board is powered by USB Type-C at 5.0V (4.0V to 5.25V) or by a 3.7V Lipo battery. Its operating temperature ranges from -40 °C to +85 °C.
Programming. Arduino support is available for firmware development.
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for E32S3128GC, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Arduino support | Yes |
| Button | Flash button and reset button |
| Controller | ESP32-S3 |
| LCD | 1.28", 240*240 resolution, driver GC9A01 |
| LCD interface | SPI |
| Mabee interface | 1*I2C; 1*GPIO |
| microSD | Yes |
| Operation Temperature | -40℃ to +85℃ |
| Power supply | USB Type-C 5.0V(4.0V~5.25V); 3.7V Lipo battery |
| Touch Panel Driver | CST816S |
| USB | USB Native |
| Wireless | WiFi& Bluetooth 5.0 |
No specification matches.
Last verification : 2026-11-02
Official documents and the technical data recorded for E32S3128GC. For a missing document or a specific revision, our experts send it to you.
Makerfabs ESP32-S3 development board combining a 1.28-inch 240x240 round touch TFT display with Wi-Fi and Bluetooth 5.0, intended for prototyping compact embedded interfaces such as a smartwatch.
| Parameter | Value |
|---|---|
| Arduino support | Yes |
| Button | Flash button and reset button |
| Controller | ESP32-S3 |
| LCD | 1.28", 240*240 resolution, driver GC9A01 |
| LCD interface | SPI |
| Mabee interface | 1*I2C; 1*GPIO |
| microSD | Yes |
| Operation Temperature | -40℃ to +85℃ |
| Power supply | USB Type-C 5.0V(4.0V~5.25V); 3.7V Lipo battery |
| Touch Panel Driver | CST816S |
| USB | USB Native |
| Wireless | WiFi& Bluetooth 5.0 |
Answers to the questions that the recorded characteristics of E32S3128GC can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "Mabee interface": 1*I2C; 1*GPIO.
Yes — recorded under "LCD interface": SPI.
Yes — recorded under "Wireless": WiFi& Bluetooth 5.0.
Yes — recorded under "Wireless": WiFi& Bluetooth 5.0.
Yes — recorded under "Power supply": USB Type-C 5.0V(4.0V~5.25V); 3.7V Lipo battery.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
ESP32-S3 development board with 1.28-inch round touch display

MaTouch ESP32-S3 RotaryIPS-Display1.28" GC9A01

Matouch 1.28" ToolSet Controller

MaTouch ESP32-S3 Parallel TFT with Touch 3.5'' ILI9488

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | E32S3128GC |
| Manufacturer | Makerfabs |
Maker, Prototyping, Open-Hardware & Developer Boards
M12 fisheye lens for camera module · Ref. : M12_FISHEYE
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 System-on-Module with 1 TOPS NPU
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
RK3568 Android tablet mainboard with DTV tuner · Ref. : K3-3568
Price on request
Maker, Prototyping, Open-Hardware & Developer Boards
Boost converter module 3.3 V to 12 V 50 mA · Ref. : 110155
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details